用户报告在升级到Windows 10后遇到WiFi断开连接问题，一些用户也面临这个问题，无论升级如何。检测到无线网络^{(Wireless Network)}并且可用，但由于某种原因，它会断开连接，然后不会自动重新连接。

现在有时主要问题是WiFi Sense，这是Windows 10中设计的一个功能，可以更轻松地连接到WiFi网络，但它通常弊大于利。WiFi Sense使您能够自动连接到另一个Windows 10用户之前连接并共享的开放无线热点。WiFi Sense默认启用，有时只需将其关闭似乎可以解决问题。

WiFi在^(WiFi)Windows 10上不断断开连接的原因可能还有其他原因，例如：

• 损坏/过时的无线驱动程序
• 电源管理问题
• 家庭网络标记为公共。
• Intel PROSet/Wireless WiFi Connection Utility Conflict

WiFi在^(WiFi)Windows 10中不断断开[已解决]

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：将您的家庭网络标记为私有而不是公共^{(Method 1: Mark your Home Network as Private instead of Public)}

1. 单击系统托盘中的 Wi-Fi 图标。^{(System Tray.)}

2. 然后再次点击已连接的Wi-Fi 网络^{(Wi-Fi network)}，弹出子菜单，点击属性。^{( Properties.)}

3.将网络^{(Make Network)}设为私有^(Private)而不是公共^(Public)。

4. 如果上述方法对您不起作用，请在 Windows 搜索栏中键入Homegroup。

5. 单击选项家庭组^(HomeGroup)，然后单击更改网络位置。^{(Change network location.)}

6. 接下来，单击“是”使该网络成为专用网络。^{(Yes to make this network a private network.)}

7. 现在右键单击系统托盘中的Wi-Fi 图标^{(Wi-Fi icon)}，然后选择“打开网络和 Internet 设置”。^{(Open Network & Internet Settings.)}”

8. 向下滚动然后单击网络和共享中心。^{(Network and Sharing Centre.)}

9. 确认列出的网络显示为专用网络^{( shows as Private Network)}，然后关闭窗口，您就完成了。

这肯定会修复 WiFi 在 Windows 10 中不断断开连接^{( fix WiFi keeps disconnecting in Windows 10)}但继续下一个方法。

方法 2：禁用 WiFi 感知^{(Method 2: Disable WiFi Sense)}

1. 按Windows Key + I 打开设置^(Settings)，然后单击网络和 Internet。^{(Network & Internet.)}

2. 现在从左侧菜单中选择Wi-Fi并在右侧窗口中禁用 Wi-Fi Sense 下的所有内容。^{(Disable everything under Wi-Fi Sense)}

3. 另外，请确保禁用 Hotspot 2.0 网络和付费 Wi-Fi 服务。^{(disable Hotspot 2.0 networks and Paid Wi-Fi services.)}

4. 断开 Wi-Fi 连接，然后重新连接。

看看您是否能够修复 WiFi 在 Windows 10 中不断断开连接的问题。 ^{(Fix WiFi keeps disconnecting in Windows 10 issue. )}如果没有，则继续下一个方法。

方法 3：修复电源管理问题^{(Method 3: Fix Power Management Issues)}

1. 按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2. 展开网络适配器^{( Network adapters)}，然后右键单击已安装的网络适配器并选择属性。^{(Properties.)}

3.切换到电源管理选项卡^{(Power Management Tab)}并确保取消选中^(uncheck) “允许计算机关闭此设备以节省电源。”^{(“Allow the computer to turn off this device to save power.“)}

4. 单击确定^(Ok)并关闭设备管理器。^{(evice Manager.)}

5. 现在按Windows Key + I 打开设置，然后 Click System > Power & Sleep.

6. 现在点击附加电源设置^{(Additional power settings)}。

7.接下来，单击您使用的电源计划旁边的“更改计划设置”。^{(Change plan settings)}

8. 在底部单击“更改高级电源设置”。^{(Change advanced power settings.)}”

9. 展开Wireless Adapter Settings，然后再次展开Power Saving Mode。

10. 接下来，您将看到两种模式，“使用电池”和“插入”。将它们都更改^(Change)为最高性能。^{(Maximum Performance.)}

11.单击应用^{(Click Apply)}，然后单击确定。重新启动^{(Ok. Reboot)}您的 PC 以保存更改。

这将有助于修复 WiFi 在 Windows 10 问题中不断断开连接，^{(Fix WiFi keeps disconnecting in Windows 10 issue,)}但如果此方法无法完成工作，还有其他方法可以尝试。

方法 4：自动更新无线驱动程序^{(Method 4: Automatically Update the Wireless Drivers)}

1. 按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2.展开网络^{(Expand Network)}适配器，然后右键单击已安装的网络适配器并选择更新驱动程序软件。^{(Update Driver Software.)}

3. 然后选择自动搜索更新的驱动程序软件。^{( Search automatically for updated driver software.)}

4. 重新启动您的 PC 以保存更改。如果问题仍然存在，请执行下一步。

5. 再次选择更新驱动程序软件^{(Update Driver Software)}，但这次选择“浏览我的计算机以查找驱动程序软件。^{(Browse my computer for driver software.)}'

6. 接下来，在底部单击“让我从计算机上的设备驱动程序列表中选择^{(Let me pick from a list of device drivers on the computer)}”。

7. 从列表中选择最新的驱动程序，然后单击下一步。^(Next.)

8.让Windows安装驱动程序，一旦完成关闭一切。

9. 重新启动您的 PC 以保存更改。

方法 5：重新安装 WiFi 适配器驱动程序^{(Method 5: Reinstall WiFi Adapter Driver)}

如果您仍然面临Wifi断开连接的问题，那么您需要在另一台计算机上下载网络^(Network)适配器的最新驱动程序，然后在您遇到问题的 PC 上安装这些驱动程序。

1. 在另一台机器上，访问制造商网站并下载适用于^{(manufacturer website)}Windows 10的最新网络适配器^(Adapter)驱动程序。将它们复制到外部存储驱动器，然后复制到存在网络问题的设备上。

2. 按Windows Key + X，然后选择设备管理器。^{(Device Manager.)}

3. 在设备列表中找到网络适配器，然后右键单击适配器名称^{(right-click on the adapter name )}并单击卸载设备。^{(Uninstall Device.)}

4. 在打开的提示中，确保选中“删除此设备的驱动程序软件”。^{( ‘Delete the driver software for this device.’)}点击卸载。^(Uninstall.)

5 . 运行您以管理员身份下载的^{(. Run the setup file that you downloaded )}安装文件^{(Administrator)}。使用默认设置完成设置过程，您的驱动程序将被安装。重新启动您的 PC 以保存更改。

方法 6：运行网络疑难解答^{(Method 6: Run Network Troubleshooter)}

1. 按Windows Key + I 打开设置^(Settings)，然后单击更新和安全。^{( Update & Security.)}

2. 从左侧菜单中，选择疑难解答。^{( Troubleshoot.)}

3. 在疑难解答下，单击Internet 连接^{( Internet Connections)}，然后单击运行疑难解答。^{(Run the troubleshooter.)}

4. 按照屏幕上的进一步说明运行疑难解答。

5. 如果上述方法未能解决问题，请从“疑难解答”^{(Troubleshoot)}窗口中单击“网络适配器^{( Network Adapter)}” ，然后单击“运行疑难解答”。^{( Run the troubleshooter.)}

5. 重新启动您的 PC 以保存更改，看看您是否能够解决频繁的 WiFi 断开连接问题。^{( fix frequent WiFi disconnecting issues.)}

方法 7：Reset TCP/IP配置

1. 在Windows 搜索^{(Windows Search)}中键入命令提示符，然后单击命令提示符下的以管理员​​身份运行^{(Run as administrator)}。^{(Command Prompt.)}

2、一一输入^(Enter)以下命令，输入每个命令后回车：

ipconfig /release
ipconfig /renew
netsh winsock reset
netsh int ip reset
ipconfig /flushdns
ipconfig /registerdns

3. 重新启动您的 PC 以保存更改，一切顺利。

方法 8：使用谷歌 DNS^{(Method 8: Use Google DNS)}

您可以使用 Google 的DNS ，而不是您的^(DNS)Internet 服务提供商^{(Internet Service Provider)}或网络适配器制造商设置的默认DNS 。这将确保您的浏览器使用的DNS与未加载的YouTube视频无关。^(YouTube)为此，

1.右键单击^{(Right-click)}​​任务栏^(taskbar)右端的网络 (LAN) 图标^{(network (LAN) icon)}，然后单击打开网络和 Internet 设置。^{(Open Network & Internet Settings.)}

2. 在打开的设置^(settings)应用程序中，单击右侧窗格中的更改适配器选项^{(Change adapter options)}。

3.右键单击^{( Right-click)}​​要配置的网络，然后单击属性。^{(Properties.)}

4. 单击列表中的Internet 协议版本 4 (IPv4)^{(Internet Protocol Version 4 (IPv4))}，然后单击属性。^{(Properties.)}

另请阅读：^{(Also Read:)} 修复您的 DNS 服务器可能不可用错误^{(Fix Your DNS Server might be unavailable error)}

5. 在“常规”选项卡下，选择“使用以下 DNS 服务器地址^{(Use the following DNS server addresses)}”并输入以下DNS地址。

首选 DNS 服务器：8.8.8.8
^{(Preferred DNS Server: 8.8.8.8 )}备用 DNS 服务器：8.8.4.4^{(Alternate DNS Server: 8.8.4.4)}

6. 最后，单击窗口底部的确定以保存更改。

7. 重新启动您的 PC，一旦系统重新启动，看看您是否能够修复 YouTube 视频无法加载。'发生错误，稍后再试'。^{( fix YouTube videos won’t load. ‘An error occurred, try again later’.)}

方法 9：重置网络连接

1. 按Windows Key + I 打开设置^(Settings)，然后单击网络和 Internet。^{( Network & Internet.)}

2. 从左侧菜单中，选择状态。^{( Status.)}

3. 现在向下滚动并单击底部的网络重置。^{(Network reset)}

 

4. 再次单击网络重置部分下的立即重置。^{(Reset now)}

5.这将成功重置您的网络适配器，一旦完成，系统将重新启动。

方法 10：禁用 802.1 1n 模式^{(Method 10: Disable 802.1 1n Mode)}

1. 按Windows Key + R然后键入以下命令并按Enter：

control /name Microsoft.NetworkAndSharingCenter

2. 现在选择您的Wi-Fi并单击属性。^{(Properties.)}

3. 在Wi-Fi属性中，单击配置。^{( Configure.)}

4. 导航到高级选项卡^{( the Advanced tab)}，然后选择 802.11n模式^(Mode)并从值下拉列表中选择禁用。^(Disabled.)

5.单击确定^{(Click OK)}并重新启动^(Reboot)您的 PC 以保存更改。

方法 11：更改通道宽度^{(Method 11: Change Channel Width)}

1. 按 Windows 键 + R 然后键入ncpa.cpl并按 Enter 打开网络连接。^{(Network Connections.)}

2. 现在右键单击您当前的 WiFi 连接^{( current WiFi connection)}并选择属性。^{(Properties.)}

3. 单击Wi-Fi属性窗口内的配置按钮。^{(Configure button)}

4. 切换到高级选项卡^{( Advanced tab)}并选择802.11 信道宽度。^{(802.11 Channel Width.)}

5. 将 802.11 Channel Width^{(Channel Width)}的值更改为Auto ，然后单击 OK。

6. 关闭所有内容并重新启动您的 PC 以保存更改。

您可以使用此方法修复 Windows 10 中的 Wifi 断开连接问题^{(fix Wifi disconnecting in Windows 10 issue)} ，但如果由于某种原因它对您不起作用，请继续。

Method 12: Install Intel PROSet/Wireless Software and Drivers for Windows 10

有时问题是由于过时的英特尔 PROSet 软件^{(Intel PROSet Software)}引起的，因此更新它似乎是为了修复 WiFi 不断断开连接的问题^{(Fix WiFi keeps disconnecting issue)}。因此，请前往此处^{(go here)}download the latest version of PROSet/Wireless Software并安装。这是管理您的 WiFi 连接而不是Windows^(Windows)的第三方软件，如果PROset/Wireless Software已过时，可能会导致WiFi 频繁断开连接问题。^{(WiFi disconnecting issue.)}

受到推崇的：^{(Recommended:)}

• 修复文件资源管理器无法在 Windows 10 中打开^{(Fix File Explorer won’t open in Windows 10)}
• 如何修复 Windows 10 不记得保存的 WiFi 密码^{(How to Fix Windows 10 Won’t Remember Saved WiFi Password)}
• 下载东西时 Steam 滞后 [已解决]^{(Steam lags when downloading something [SOLVED])}
• 解决 Windows Update 卡住下载更新的问题^{(Troubleshoot Windows Update stuck downloading updates)}

就是这样，您已成功修复 WiFi 在 Windows 10 中不断断开连接，^{(Fix WiFi keeps disconnecting in Windows 10)} 但如果您对这篇文章仍有任何疑问，请随时在评论部分询问他们。

WiFi keeps disconnecting in Windows 10 [SOLVED]

Uѕers have reported expеriencing Discоnnecting issues with their WiFi after upgrading to Windows 10, well some users also face this issue regardless of the upgrade. Wireless Network is detected and available, but for some reason, it gets disconnected and then doеsn’t automatiсally reconnect.

Now sometimes the main issue is WiFi Sense which is a featured designed in Windows 10 to make it easier to connects to WiFi networks, but it usually does more harm than good. WiFi Sense enables you to automatically connect to an open wireless hotspot that another Windows 10 user has previously connected to and shared. WiFi Sense is by default enabled and sometimes just turning it off seems to fix the issue.

There can be other cause as to why the WiFi keeps Disconnecting on Windows 10 such as:

• Corrupted/Outdated Wireless Drivers
• Power Management Issue
• Home Network marked as Public.
• Intel PROSet/Wireless WiFi Connection Utility Conflict

WiFi keeps disconnecting in Windows 10 [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Mark your Home Network as Private instead of Public

1. Click on the Wi-Fi icon in the System Tray.

2. Then again click on the connected Wi-Fi network to bring out the sub-menu and click on Properties.

3. Make Network as Private instead of Public.

4. If above didn’t work for you then type Homegroup in Windows Search bar.

5. Click the option HomeGroup and then click Change network location.

6. Next, click Yes to make this network a private network.

7. Now right-click on the Wi-Fi icon in the system tray and select “Open Network & Internet Settings.”

8. Scroll down then click on Network and Sharing Centre.

9. Verify that the network listed shows as Private Network then close the window, and you’re done.

This would definitely fix WiFi keeps disconnecting in Windows 10 but continues to the next method.

Method 2: Disable WiFi Sense

1. Press Windows Key + I to open Settings then click on Network & Internet.

2. Now select Wi-Fi from the left-hand menu and Disable everything under Wi-Fi Sense in the right window.

3. Also, make sure to disable Hotspot 2.0 networks and Paid Wi-Fi services.

4. Disconnect your Wi-Fi connection and then again reconnect.

See if you’re able to Fix WiFi keeps disconnecting in Windows 10 issue. If not, then continue with the next method.

Method 3: Fix Power Management Issues

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Expand Network adapters then right-click on your installed network adapter and select Properties.

3. Switch to Power Management Tab and make sure to uncheck “Allow the computer to turn off this device to save power.“

4. Click Ok and close the Device Manager.

5. Now press Windows Key + I to open Settings then Click System > Power & Sleep.

6. Now click Additional power settings.

7. Next, click “Change plan settings” next to the power plan which you use.

8. At the bottom click on “Change advanced power settings.”

9. Expand Wireless Adapter Settings, then again expand Power Saving Mode.

10. Next, you will see two modes, ‘On battery’ and ‘Plugged in.’ Change both of them to Maximum Performance.

11. Click Apply, followed by Ok. Reboot your PC to save changes.

This would help Fix WiFi keeps disconnecting in Windows 10 issue, but there are other methods to try if this one fails to do its job.

Method 4: Automatically Update the Wireless Drivers

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Expand Network adapters then right-click on your installed network adapter and select Update Driver Software.

3. Then choose Search automatically for updated driver software.

4. Reboot your PC to save changes. If the problem persists, then follow the next step.

5. Again select Update Driver Software but this time chooses ‘Browse my computer for driver software.‘

6. Next, at the bottom click ‘Let me pick from a list of device drivers on the computer.’

7. Select the latest driver from the list and click Next.

8. Let the Windows install drivers and once complete close everything.

9. Reboot your PC to save changes.

Method 5: Reinstall WiFi Adapter Driver

If you’re still facing the Wifi disconnecting issue, then you need to download the latest drivers for Network adapter on another computer and then install these drivers on the PC on which you’re facing the issue.

1. On another machine, visit the manufacturer website and download the latest Network Adapter drivers for Windows 10. Copy them to an external storage drive and then onto the device with network issues.

2. Press Windows Key + X then select Device Manager.

3. Locate the network adapter in the devices list, then right-click on the adapter name and click on Uninstall Device.

4. In the prompt that opens up, make sure to checkmark ‘Delete the driver software for this device.’ Click on Uninstall.

5. Run the setup file that you downloaded as an Administrator. Go through the setup process with defaults, and your drivers will be installed. Reboot your PC to save changes.

Method 6: Run Network Troubleshooter

1. Press Windows Key + I to open Settings then click on Update & Security.

2. From the left-hand menu, select Troubleshoot.

3. Under Troubleshoot, click on Internet Connections and then click Run the troubleshooter.

4. Follow further on-screen instructions to run the troubleshooter.

5. If the above didn’t fix the issue then from the Troubleshoot window, click on Network Adapter and then click on Run the troubleshooter.

5. Reboot your PC to save changes and see if you’re able to fix frequent WiFi disconnecting issues.

Method 7: Reset TCP/IP configuration

1. Type command prompt in Windows Search then click on Run as administrator under Command Prompt.

2. Type the following commands one by one and press Enter after typing each command:

ipconfig /release
ipconfig /renew
netsh winsock reset
netsh int ip reset
ipconfig /flushdns
ipconfig /registerdns

3. Reboot your PC to save changes, and you will be good to go.

Method 8: Use Google DNS

You can use Google’s DNS instead of the default DNS set by your Internet Service Provider or the network adapter manufacturer. This will ensure that the DNS your browser is using has nothing to do with the YouTube video not loading. To do so,

1. Right-click on the network (LAN) icon in the right end of the taskbar, and click on Open Network & Internet Settings.

2. In the settings app that opens, click on Change adapter options in the right pane.

3. Right-click on the network you want to configure, and click on Properties.

4. Click on Internet Protocol Version 4 (IPv4) in the list and then click on Properties.

Also Read: Fix Your DNS Server might be unavailable error

5. Under the General tab, choose ‘Use the following DNS server addresses’ and put the following DNS addresses.

Preferred DNS Server: 8.8.8.8
Alternate DNS Server: 8.8.4.4

6. Finally, click OK at the bottom of the window to save changes.

7. Reboot your PC and once the system restart, see if you’re able to fix YouTube videos won’t load. ‘An error occurred, try again later’.

Method 9: Reset Network Connection

1. Press Windows Key + I to open Settings then click on Network & Internet.

2. From the left-hand menu, select Status.

3. Now scroll down and click on Network reset at the bottom.

 

4. Again click on Reset now under Network reset section.

5. This will successfully reset your network adapter, and once it is complete, the system will be restarted.

Method 10: Disable 802.1 1n Mode

1. Press Windows Key + R then type the following command and hit Enter:

control /name Microsoft.NetworkAndSharingCenter

2. Now select your Wi-Fi and click on Properties.

3. Inside Wi-Fi properties, click on Configure.

4. Navigate to the Advanced tab then select 802.11n Mode and from the value drop-down select Disabled.

5. Click OK and Reboot your PC to save changes.

Method 11: Change Channel Width

1. Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections.

2. Now right-click on your current WiFi connection and select Properties.

3. Click on the Configure button inside the Wi-Fi properties window.

4. Switch to the Advanced tab and select the 802.11 Channel Width.

5. Change the value of 802.11 Channel Width to Auto then click OK.

6. Close everything and reboot your PC to save changes.

You may be able to fix Wifi disconnecting in Windows 10 issue with this method but if for some reason it didn’t work for you then continue.

Method 12: Install Intel PROSet/Wireless Software and Drivers for Windows 10

Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to Fix WiFi keeps disconnecting issue. Therefore, go here and download the latest version of PROSet/Wireless Software and install it. This is third-party software that manages your WiFi connection instead of Windows, and if PROset/Wireless Software is outdated, it can cause frequent WiFi disconnecting issue.

Recommended:

• Fix File Explorer won’t open in Windows 10
• How to Fix Windows 10 Won’t Remember Saved WiFi Password
• Steam lags when downloading something [SOLVED]
• Troubleshoot Windows Update stuck downloading updates

That’s it you have successfully Fix WiFi keeps disconnecting in Windows 10 but if you still have any queries regarding this post feel free to ask them in the comment’s section.

Related posts

• USB Device不在Windows 10工作[求助]

• Windows 10中的Mouse Pointer Lags [已解决]

• Windows 10上的Computer Restarts Randomly [已解决]

• Windows 10中的Photo App Keeps Crashing [已解决]

• HDMI Port不适用于Windows 10 [已解决]

• Airplane Mode未在Windows 10中关闭[已解决]

• [已解决] Windows 10中意外的商店异常BSOD

• 在Windows 10中添加Printer [指南]

• Fix WiFi不在Windows 10中工作[100％工作]

• Windows无法完成extraction error [已解决]

• Windows 10中的WiFi未启用Fix DHCP

• Display driver停止响应并恢复错误[已解决]

• Windows 10 Creator Update无法安装[已解决]

• Microsoft Virtual Wifi Miniport Adapter driver问题[解决]

• 禁用Windows 10中的Lock Screen [指南]

• Windows 10缺少Fix MSVCR120.dll [已解决]

• 如何在Windows 10中编辑主机File [指南]

• 触摸板在 Windows 10 中不起作用 [已解决]

• 修复 Windows 10 中的键盘输入延迟 [已解决]

• 如何在Windows 10上Enter BIOS [指南]