修复 Windows 无法完成提取错误： ^{(Fix Windows cannot complete the extraction error: )}尝试提取 zip 文件的内容时，您可能会遇到以下错误消息“ Windows无法完成提取。无法创建目标文件。” 为了解决这个问题，只需遵循本指南。现在还有此错误的其他变体，例如“压缩（压缩）文件夹无效”或目标路径太长，或压缩压缩文件夹无效等。

在尝试压缩文件或提取压缩文件的内容时，您也可能会收到上述任何错误消息。因此，不要浪费任何时间，让我们看看如何在下面列出的故障排除指南的帮助下实际修复 Windows^{(Fix Windows)}无法完成提取错误。

Windows 无法完成提取错误 [已解决]

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：将 zip 文件移动到另一个位置^{(Method 1: Move the zip file to another location)}

如果您遇到错误消息“ Windows 无法完成提取。无法创建目标文件^{(Windows cannot complete the extraction. The destination file could not be created)}”，那么您尝试打开或提取的 zip 文件可能位于受保护区域中。要解决此问题，只需将 zip 文件移动到Desktop，文档等。如果这不起作用，那么不用担心，只需按照下一个方法。

方法2：看看你是否可以打开另一个zip文件^{(Method 2: See if you can open another zip file)}

Windows资源管理器^{(Windows Explorer)}可能会损坏，这就是您无法访问文件的原因。为了确保这里是这种情况，只需尝试在Windows 资源管理器^{(Windows Explorer)}中的不同位置提取任何其他 zip 文件，看看您是否能够这样做。如果其他 zip 文件正确打开，则此特定 zip 文件可能已损坏或无效。

方法 3：运行 SFC 和 CHKDSK^{(Method 3: Run SFC and CHKDSK)}

1.按Windows Key + X然后单击命令提示符（管理员）。^{( Command Prompt(Admin).)}

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.等待上述过程完成，完成后重新启动您的电脑。

4.接下来，从这里运行 CHKDSK  Fix File System Errors with Check Disk Utility(CHKDSK)。

5.让上述过程完成并再次重新启动您的 PC 以保存更改。看看你是否能够 修复 Windows 无法完成提取错误^{(Fix Windows cannot complete the extraction error)}，如果不能，则继续下一个方法。

方法 4：执行干净启动^{(Method 4: Perform Clean Boot)}

1.按 Windows 键 + R 然后输入msconfig并按回车键进入系统配置。^{(System Configuration.)}

2.在常规选项卡上，选择选择性启动^{( Selective Startup)}，并确保未选中“加载启动项^{(load startup items)}”选项。

3.导航到“服务^(Services)”选项卡并选中“隐藏所有 Microsoft 服务”框。^{(Hide all Microsoft services.)}“

4.下一步，单击禁用所有^{(Disable all)}这将禁用所有其他剩余服务。

5.重新启动您的PC检查问题是否仍然存在。

6.完成故障排除后，请务必撤消上述步骤才能正常启动PC。

看看您是否能够在Clean Boot中提取 zip 文件的内容，如果您是某些 3rd 方应用程序可能与Windows冲突。通过此方法^{(this method.)}解决问题。^{(Troubleshoot)}

方法 5：修复文件名对于目标来说太长^{(Method 5: Fix The file name(s) would be too long for the destination)}

如果您遇到上述错误消息，那么它清楚地表明文件名太长，因此只需将 zip 文件重命名为较短的文件，例如 test.zip 并再次尝试访问 zip 文件，看看您是否能够修复Windows 无法完成提取错误。^{(Fix Windows cannot complete the extraction error.)}

方法6：修复压缩（zipped）文件夹无效^{(Method 6: Fix The compressed (zipped) folder is invalid)}

如果您遇到上述错误消息，那么您可以尝试使用 3rd 方应用程序来访问 zip 文件的内容。尝试以下 zip 存档软件：

Winrar
7-zip

看看您是否能够使用上述任何一种软件压缩或提取 zip 文件的内容。

受到推崇的：^{(Recommended:)}

• 修复 Steam 错误无法加载 steamui.dll^{(Fix Steam Error Failed to load steamui.dll)}
• 在 Windows 10 中更改驱动器、文件夹或库的模板^{(Change Template of a Drive, Folder, or Library in Windows 10)}
• 修复无法连接到 Steam 网络错误^{(Fix Could Not Connect to the Steam Network Error)}
• 修复 Windows 10 中未为 WiFi 启用 DHCP^{(Fix DHCP is not enabled for WiFi in Windows 10)}

就是这样，您已成功修复 Windows 无法完成提取错误^{(Fix Windows cannot complete the extraction error)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Windows cannot complete the extraction error [SOLVED]

Fix Windows cannot complete the extraction error: While trying to extract contents of a zip file you may face the following error message “Windows cannot complete the extraction. The destination file could not be created.”  and in order to fix this issue just follow this guide. Now there are other variations of this error such as “The compressed (zipped) folder is invalid” or The destination path is too long, or The compressed zipped folder is invalid etc.

It’s also possible that you may receive any of the above error messages while trying to compress a file or while extracting the contents of a zipped file. So without wasting any time let’s see how to actually Fix Windows cannot complete the extraction error with the help of below-listed troubleshooting guide.

Windows cannot complete the extraction error [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Move the zip file to another location

If you’re facing the error message “Windows cannot complete the extraction. The destination file could not be created” then it’s possible that the zip file you’re trying to open or extract is in the protected area. To resolve this issue, just move the zip file to Desktop, documents, etc. If this doesn’t work, then no worries, just follow the next method.

Method 2: See if you can open another zip file

Chances are Windows Explorer might get corrupted and that’s why you’re not able to access your files. In order to make sure this is the case here just try to extract any other zip file in different locations in Windows Explorer and see if you’re able to do so. If other zip files open properly then this particular zip file may be corrupted or invalid.

Method 3: Run SFC and CHKDSK

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).

5.Let the above process complete and again reboot your PC to save changes. See if you’re able to Fix Windows cannot complete the extraction error, if not then continue with next method.

Method 4: Perform Clean Boot

1.Press Windows Key + R then type msconfig and hit enter to System Configuration.

2.On General tab, choose Selective Startup and under it make sure the option “load startup items” is unchecked.

3.Navigate to the Services tab and checkmark the box that says “Hide all Microsoft services.“

4.Next, click Disable all which would disable all the other remaining services.

5.Restart your PC check if the problem persists or not.

6.After you had finish troubleshooting make sure to undo the above steps in order to start your PC normally.

See if you’re able to extract the contents of the zip file in Clean Boot if you’re then some 3rd party app might be conflicting with Windows. Troubleshoot the issue via this method.

Method 5: Fix The file name(s) would be too long for the destination

If you are facing the above error message then it clearly states the file name is too long, so just rename the zip file to something short such as test.zip and again try to access the zip file and see if you’re able to Fix Windows cannot complete the extraction error.

Method 6: Fix The compressed (zipped) folder is invalid

If you are facing above error message then you may try using 3rd party applications in order to access the content of zip file. Try the following zip archive software:

Winrar
7-zip

See if you’re able to compress or extract the contents of zip file using any one of the above software.

Recommended:

• Fix Steam Error Failed to load steamui.dll
• Change Template of a Drive, Folder, or Library in Windows 10
• Fix Could Not Connect to the Steam Network Error
• Fix DHCP is not enabled for WiFi in Windows 10

That’s it you have successfully Fix Windows cannot complete the extraction error but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• USB Device不在Windows 10工作[求助]

• Windows 10中的Mouse Pointer Lags [已解决]

• Display driver停止响应并恢复错误[已解决]

• WiFi在Windows 10中断断开连接[已解决]

• Windows 10 Creator Update无法安装[已解决]

• Error 1962：未发现操作系统[已解决]

• 发生磁盘读取错误 [已解决]

• 修复Nexus Mod Manager登录错误[已解决]

• USB 端口在 Windows 10 中不工作 [已解决]

• 您当前的安全设置不允许下载此文件 [已解决]

• Windows 10缺少Fix MSVCR120.dll [已解决]

• 默认打印机保持更改[已解决]

• 目录名称无效错误 [已解决]

• 修复 Windows 10 中的键盘输入延迟 [已解决]

• Fix您的Computer是Low在内存警告[解决]

• HDMI Port不适用于Windows 10 [已解决]

• Nvidia Kernel Mode Driver已停止响应[已解决]

• Airplane Mode未在Windows 10中关闭[已解决]

• Microsoft Virtual Wifi Miniport Adapter driver问题[解决]

• 您的帐户Has Been Disabled。请参阅系统管理员[已解决]