如果您遇到Windows 10 PC 无法自动连接到已保存的WiFi网络的问题，即使您已正确配置网络以自动连接，请不要担心，因为今天我们将了解如何解决此问题问题。问题是当您启动 PC 时，WiFi不会在Windows 10中自动连接，您必须手动查找可用网络，然后选择您保存的网络连接并按Connect。但是当您选中“自动连接”框时， WiFi应该会自动连接。^(WiFi)

好吧，这个问题没有特别的原因，但这可能是由简单的系统升级引起的，之后WiFi 适配器^{(WiFi Adapter)}被关闭以节省电力，您需要将设置更改回正常来解决问题。因此，不要浪费任何时间，让我们在下面列出的故障排除指南的帮助下，看看如何修复 WiFi在^{(Fix WiFi)}Windows 10中无法自动连接。

修复 WiFi在^{(Fix WiFi)}Windows 10中无法自动连接

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：忘记您的 WiFi 网络^{(Method 1: Forget your WiFi Network)}

1.单击系统托盘中的无线^(Wireless)图标，然后单击网络设置。^{(Network Settings.)}

2.然后单击管理已知网络^{( Manage Known networks)}以获取已保存网络的列表。

3.现在选择Windows 10不会记住密码的那个，然后单击忘记。^{(click Forget.)}

4.再次单击系统托盘中的无线图标^{( wireless icon)}并连接到您的网络，它会要求输入密码，因此请确保您随身携带无线^(Wireless)密码。

5.输入密码后，您将连接到网络，Windows将为您保存该网络。

6.重新启动您的 PC 并再次尝试连接到同一网络。此方法似乎可以 修复 WiFi 在 Windows 10 中无法自动连接。^{(Fix WiFi doesn’t connect automatically in Windows 10.)}

方法二：调整 WiFi 适配器电源管理设置^{(Method 2: Adjust WiFi Adapter Power Management Settings)}

1.按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2.展开网络适配器^{( Network adapters)}，然后右键单击已安装的网络适配器并选择属性。^{(Properties.)}

3.切换到电源管理选项卡^{(Power Management Tab)}，确保取消选中^(uncheck)“允许计算机关闭此设备以节省电源”。^{(Allow the computer to turn off this device to save power.)}”

4.单击确定并关闭设备管理器^{(Device Manager)}。

5.现在按Windows Key + I 打开设置，然后 Click System > Power & Sleep.

6.在底部单击附加电源设置。^{(click Additional power settings.)}

7.现在单击您使用的电源计划旁边的“更改计划设置”。^{(Change plan settings)}

8.在底部单击“更改高级电源设置。^{(Change advanced power settings.)}”

9.展开无线适配器设置^{( Wireless Adapter Settings)}，然后再次展开省电模式。^{(Power Saving Mode.)}

10.接下来，您将看到两种模式，“使用电池”和“插入”。将它们都更改^(Change)为最高性能。^{(Maximum Performance.)}

11.单击应用^(Apply)，然后单击确定。重新启动^{(Ok. Reboot)}您的 PC 以保存更改。

方法 3：回滚网络适配器驱动程序^{(Method 3: Roll Back Network Adapter Drivers)}

1.按 Windows 键 + R 然后键入devmgmt.msc并按Enter打开设备管理器^{(Device Manager)}。

2.展开网络适配器^{(Network Adapter)} ，然后右键单击您的无线适配器^{(Wireless Adapter)} 并选择属性。^{(Properties.)}

3.切换到驱动程序选项卡^{(Driver tab)}，然后单击回滚驱动程序。^{(Roll Back Driver.)}

4.选择Yes/OK以继续驱动程序回滚。

5.回滚完成后，重启电脑。

查看您是否能够修复 WiFi 在 Windows 10 中无法自动连接^{(Fix WiFi doesn’t connect automatically in Windows 10)}，如果不能，则继续下一个方法。

方法 4：运行网络疑难解答^{(Method 4: Run Network Troubleshooter)}

1.右键单击网络图标并选择疑难解答。^{( Troubleshoot problems.)}

2.按照屏幕上的说明进行操作。

3.现在按Windows key + W并键入故障排除^{( Troubleshooting)}按回车键。

4.从那里选择“网络和互联网。^{(Network and Internet.)}”

5.在下一个屏幕中单击网络适配器。^{(Network Adapter.)}

6.按照屏幕上的说明修复 WiFi 在 Windows 10 中无法自动连接。^{(Fix WiFi doesn’t connect automatically in Windows 10.)}

方法 5：卸载网络适配器驱动程序^{(Method 5: Uninstall Network Adapter Driver)}

1.按 Windows 键 + R 然后键入“ devmgmt.msc ”并按Enter打开设备管理器^{(Device Manager)}。

2.展开网络适配器并找到您的网络适配器名称。^{(your network adapter name.)}

3. 确保记下适配器名称^{(note down the adapter name)}，以防万一出现问题。

4.右键单击您的网络适配器并将其卸载。

5.如果要求确认选择是。^{( select Yes.)}

6.重新启动您的 PC 并尝试重新连接到您的网络。

7.如果您无法连接到您的网络，则表示驱动程序软件^{(driver software)}没有自动安装。

8.现在您需要访问制造商的网站并从那里下载驱动程序。^{(download the driver)}

9.安装驱动程序并重新启动您的PC。

通过重新安装网络适配器，您可以 修复 WiFi 在 Windows 10 中无法自动连接。^{(Fix WiFi doesn’t connect automatically in Windows 10.)}

方法 6：更新网络适配器驱动程序^{(Method 6: Update Network Adapter Drivers)}

1.按Windows键+R，在运行对话框中输入“ devmgmt.msc ”打开^{(devmgmt.msc)}设备管理器。^{(device manager.)}

2.展开网络适配器^{(Network adapters)}，然后右键单击您的Wi-Fi 控制器^{( Wi-Fi controller)}（例如Broadcom或Intel）并选择更新驱动程序。^{(Update Drivers.)}

3.在更新驱动程序软件窗口^{(Update Driver Software Windows)}中，选择“浏览我的电脑以查找驱动程序软件。^{(Browse my computer for driver software.)}”

4.现在选择“让我从计算机上的设备驱动程序列表中选择。^{(Let me pick from a list of device drivers on my computer.)}”

5.尝试从列出的版本更新驱动程序。^{(update drivers from the listed versions.)}

6.如果上述方法不起作用，请到制造商的网站^{(the manufacturer’s website)}更新驱动程序：https://downloadcenter.intel.com/

7.重新启动以应用更改。

方法 7：删除 Wlansvc 文件^{(Method 7: Delete Wlansvc Files)}

1.按 Windows 键 + R 然后键入services.msc并按 Enter。

2.向下滚动直到找到WWAN AutoConfig然后右键单击它并选择Stop。

3.再次按Windows Key + R，然后键入“ C:\ProgramData\Microsoft\Wlansvc\ ”（不带引号）并按 Enter。

4.删除Wlansvc 文件夹中除配置文件外的^{(Wlansvc folder except for profiles.)}所有内容（很可能是MigrationData文件夹） 。

5.现在打开Profiles文件夹并删除除Interfaces 之外的所有内容。^{( Interfaces.)}

6. 同样，打开Interfaces文件夹，然后删除其中的所有内容。

7.关闭文件资源管理器^{(File Explorer)}，然后在服务窗口中右键单击WLAN AutoConfig并选择开始。^(Start.)

方法 8：禁用 Microsoft Wi-Fi Direct 虚拟适配器^{(Method 8: Disable Microsoft Wi-Fi Direct Virtual Adapter)}

1.按 Windows 键 + R 然后键入devmgmt.msc并按Enter打开设备管理器^{(Device Manager)}。

2.展开网络^(Network)适配器，然后单击查看^(View)并选择显示隐藏的设备。^{(Show hidden devices.)}

3.右键单击Microsoft Wi-Fi Direct 虚拟适配器^{(Microsoft Wi-Fi Direct Virtual Adapter)}并选择禁用。^(Disable.)

4.重新启动您的 PC 以保存更改。

Method 9: Install Intel PROSet/Wireless Software

有时问题是由于过时的英特尔 PROSet 软件^{(Intel PROSet Software)}引起的，因此更新它似乎可以修复 Windows 10 中缺少的网络适配器^{(Fix Network Adapter Missing in Windows 10)}。因此，请前往此处^{(go here)}下载最新版本的 PROSet/Wireless Software并安装。这是管理您的 WiFi 连接而不是Windows^(Windows)的第三方软件，如果PROset/Wireless Software已过时，可能会导致 无线网络适配器中的驱动程序问题。^{(Wireless Network Adapter.)}阅读如何在 Windows 10 上更新网络适配器驱动程序。^{(How to Update Network Adapter Drivers on Windows 10.)}阅读如何在 Windows 10 上更新网络适配器驱动程序。^{(How to Update Network Adapter Drivers on Windows 10.)}

方法 10：注册表修复^{(Method 10: Registry Fix)}

注意：确保备份注册表^{(backup Registry)}以防万一出现问题。

1.按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

2.导航到以下注册表项：

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WcmSvc

3.^(WcmSvc)在左侧窗格中展开 WcmSvc 并查看它是否具有GroupPolicy键^{( GroupPolicy key)}，如果没有，则右键单击WcmSvc并选择New > Key.

4.将此新密钥命名为GroupPolicy，然后按 Enter。

5.现在右键单击GroupPolicy并选择New > DWORD (32-bit) value.

6.接下来，将此新键命名为fMinimizeConnections并按 Enter。

7.重新启动您的 PC 以保存更改。

方法 11：禁用快速启动^{(Method 11: Disable Fast Startup)}

1.按Windows Key + R然后键入 control 并按Enter打开控制面板。^{(Control Panel.)}

2.点击硬件和声音，^{(Hardware and Sound)}然后点击电源选项^{(Power Options)}。

3.然后从左侧窗格中选择“选择电源按钮的功能。^{(Choose what the power buttons do.)}”

4.现在点击“更改当前不可用的设置。^{(Change settings that are currently unavailable.)}”

5.取消选中“开启快速启动^{(Turn on fast startup)}”并点击保存更改。

6.重新启动您的 PC 以保存更改并查看您是否能够修复 WiFi 无法自动连接，因为WiFi 选项未在 Windows 10 中显示^{(WiFi Option Not Showing in Windows 10)( Fix WiFi doesn’t connect automatically as WiFi Option Not Showing in Windows 10)}。

方法 12：运行 SFC 和 DISM^{(Method 12: Run SFC and DISM)}

1.按Windows Key + X然后单击命令提示符（管理员）。^{( Command Prompt(Admin).)}

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.等待上述过程完成，完成后重新启动您的电脑。

4.再次打开cmd并输入以下命令并在每个命令后按回车键：

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.让DISM命令运行并等待它完成。

6. 如果上述命令不起作用，请尝试以下操作：

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

注意：^(Note:) 将^(Replace)C:RepairSourceWindows 替换为修复源的位置（Windows 安装^{(Windows Installation)}或恢复光盘^{(Recovery Disc)}）。

7.重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 修复无法设置默认打印机错误 0x00000709^{(Fix Unable to Set Default Printer Error 0x00000709)}
• 修复麦克风在 Windows 10 上不起作用^{(Fix Microphone Not Working on Windows 10)}
• 从 Windows 10 移除 Candy Crush Soda Saga^{(Remove Candy Crush Soda Saga from Windows 10)}
• 如何在 Windows 10 中映射网络驱动器^{(How to Map Network Drive in Windows 10)}

就是这样，您已成功修复 WiFi 在 Windows 10 中无法自动连接，^{(Fix WiFi doesn’t connect automatically in Windows 10)}但如果您对本文仍有任何疑问，请随时在评论部分提出。

Fix WiFi does not connect automatically in Windows 10

If you’re facing the issue where уour Windows 10 PC is not able to connect to the saved WiFi network automatically even though you have properly configured the network to connect аυtomatically then don’t worry аs today we are going to see how to fix this issue. The problem is when you start your PC, the WiFi doesn’t connect automatically in Windows 10 and you have to manually look for аvailablе networks then select your saved network сonnection and press Connect. But the WiFi should connect automatiсally as уou have checked the box “Automatically cоnnеct”.

Well, there is no particular cause for this issue but this can be caused by a simple system upgrade after which the WiFi Adapter is turned off to save power and you need to alter the settings back to normal to fix the issue. So without wasting any time let’s see How to Fix WiFi doesn’t connect automatically in Windows 10 with the help of the below-listed troubleshooting guide.

Fix WiFi doesn’t connect automatically in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Forget your WiFi Network

1.Click on the Wireless icon in the system tray and then click Network Settings.

2.Then click on Manage Known networks to get the list of saved networks.

3.Now select the one which Windows 10 won’t remember the password for and click Forget.

4.Again click the wireless icon in the system tray and connect to your network, it will ask for the password, so make sure you have the Wireless password with you.

5.Once you have entered the password you will connect to the network and Windows will save this network for you.

6.Reboot your PC and again try to connect to the same network. This method seems to Fix WiFi doesn’t connect automatically in Windows 10.

Method 2: Adjust WiFi Adapter Power Management Settings

1.Press Windows Key + R then type devmgmt.msc and hit Enter.

2.Expand Network adapters then right-click on your installed network adapter and select Properties.

3.Switch to Power Management Tab and make sure to uncheck “Allow the computer to turn off this device to save power.”

4.Click Ok and close the Device Manager.

5.Now press Windows Key + I to open Settings then Click System > Power & Sleep.

6.On the bottom click Additional power settings.

7.Now click “Change plan settings” next to the power plan which you use.

8.At the bottom click on “Change advanced power settings.”

9.Expand Wireless Adapter Settings, then again expand Power Saving Mode.

10.Next, you will see two modes, ‘On battery’ and ‘Plugged in.’ Change both of them to Maximum Performance.

11.Click Apply followed by Ok. Reboot your PC to save changes.

Method 3: Roll Back Network Adapter Drivers

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Network Adapter and then right-click on your Wireless Adapter and select Properties.

3.Switch to the Driver tab and click on Roll Back Driver.

4.Choose Yes/OK to continue with driver rollback.

5.After the rollback is complete, reboot your PC.

See if you’re able to Fix WiFi doesn’t connect automatically in Windows 10, if not then continue with the next method.

Method 4: Run Network Troubleshooter

1.Right-click on the network icon and select Troubleshoot problems.

2.Follow the on-screen instructions.

3.Now press Windows key + W and type Troubleshooting hit enter.

4.From there select “Network and Internet.”

5.In the next screen click on Network Adapter.

6.Follow the on-screen instruction to Fix WiFi doesn’t connect automatically in Windows 10.

Method 5: Uninstall Network Adapter Driver

1.Press Windows Key + R then type “devmgmt.msc” and hit Enter to open Device Manager.

2.Expand Network Adapters and find your network adapter name.

3.Make sure you note down the adapter name just in case something goes wrong.

4.Right-click on your network adapter and uninstall it.

5.If ask for confirmation select Yes.

6.Restart your PC and try to reconnect to your network.

7.If you’re not able to connect to your network then it means the driver software isn’t automatically installed.

8.Now you need to visit your manufacturer’s website and download the driver from there.

9.Install the driver and reboot your PC.

By reinstalling the network adapter, you can Fix WiFi doesn’t connect automatically in Windows 10.

Method 6: Update Network Adapter Drivers

1.Press Windows key + R and type “devmgmt.msc” in the Run dialogue box to open device manager.

2.Expand Network adapters, then right-click on your Wi-Fi controller(for example Broadcom or Intel) and select Update Drivers.

3.In the Update Driver Software Windows, select “Browse my computer for driver software.”

4.Now select “Let me pick from a list of device drivers on my computer.”

5.Try to update drivers from the listed versions.

6.If the above didn’t work then go to the manufacturer’s website to update drivers: https://downloadcenter.intel.com/

7.Reboot to apply changes.

Method 7: Delete Wlansvc Files

1.Press Windows Key + R then type services.msc and hit Enter.

2.Scroll down till you find WWAN AutoConfig then right-click on it and select Stop.

3.Again press Windows Key + R then type “C:\ProgramData\Microsoft\Wlansvc\” (without quotes) and hit Enter.

4.Delete everything (most probably the MigrationData folder) in the Wlansvc folder except for profiles.

5.Now open the Profiles folder and delete everything except the Interfaces.

6.Similarly, open the Interfaces folder then delete everything inside it.

7.Close File Explorer, then in services window right-click on WLAN AutoConfig and select Start.

Method 8: Disable Microsoft Wi-Fi Direct Virtual Adapter

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Network adapters then click on View and select Show hidden devices.

3.Right-click on Microsoft Wi-Fi Direct Virtual Adapter and select Disable.

4.Reboot your PC to save changes.

Method 9: Install Intel PROSet/Wireless Software

Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to Fix Network Adapter Missing in Windows 10. Therefore, go here and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Wireless Network Adapter. Read How to Update Network Adapter Drivers on Windows 10. Read How to Update Network Adapter Drivers on Windows 10.

Method 10: Registry Fix

Note: Make sure to backup Registry just in case something goes wrong.

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WcmSvc

3.Expand WcmSvc in the left pane and see if it has GroupPolicy key, if not then right-click on WcmSvc and select New > Key.

4.Name this new key as GroupPolicy and hit Enter.

5.Now right-click on GroupPolicy and select New > DWORD (32-bit) value.

6.Next, name this new key as fMinimizeConnections and hit Enter.

7.Reboot your PC to save changes.

Method 11: Disable Fast Startup

1.Press Windows Key + R then type control and hit Enter to open Control Panel.

2.Click on Hardware and Sound then click on Power Options.

3.Then from the left window pane select “Choose what the power buttons do.”

4.Now click on “Change settings that are currently unavailable.”

5.Uncheck “Turn on fast startup” and click on Save changes.

6.Reboot your PC to save changes and see if you’re able to Fix WiFi doesn’t connect automatically as WiFi Option Not Showing in Windows 10.

Method 12: Run SFC and DISM

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes.

Recommended:

• Fix Unable to Set Default Printer Error 0x00000709
• Fix Microphone Not Working on Windows 10
• Remove Candy Crush Soda Saga from Windows 10
• How to Map Network Drive in Windows 10

That’s it you have successfully Fix WiFi doesn’t connect automatically in Windows 10 but if you still have any questions regarding this article then feel free to ask them in the comment’s section.

Related posts

• Fix WiFi不在Windows 10中工作[100％工作]

• Fix WiFi icon Windows 10灰色灰色

• Fix 5GHz WiFi在Windows 10中没有出现

• Windows 10中的WiFi未启用Fix DHCP

• Windows 10上的Fix Limited Access or No Connectivity WiFi

• Windows 10中Fix Class不是Registered error

• 修复 Windows 10 中任务栏缺少 WiFi 图标

• Windows 10缺少Fix BOOTMGR如何缺少

• Fix System图标未显示在Windows 10任务栏上

• Windows 10上的Fix Generic PnP Monitor Problem

• Fix Computer Wo在Windows 10中没有转到Sleep Mode

• Windows 10缺少Fix VCRUNTIME140.dll

• 修复在 Windows 10 中找不到 WiFi 网络

• Fix Integrated Webcam无效Windows 10

• 升级到Windows 10后未检测到Fix CD/DVD drive

• Fix Microsoft Office在Windows 10上不打开

• Fix Computer Sound Too Low在Windows 10上

• Fix Desktop Icons Windows 10创建者更新后继续重新排列

• Fix Print Spooler Keeps在Windows 10停止

• Windows 10中的Fix Task Host Window Prevents Shut Down