修复 WiFi 受限连接问题: (Fix WiFi Limited Connectivity Problem: )如果您在WiFi 状态中遇到(WiFi status)受限连接错误(Limited Connectivity error),那么您将无法访问互联网,直到您再次连接到互联网。当您连接到WiFi时,您会收到一条访问受限(Limited Access)的消息,这意味着您已连接到Router/Modem但没有互联网(Internet),或者更糟糕的是,互联网连接可用但您的系统无法接收。
有限的连接错误(connectivity error)并不意味着您的WiFi 适配器(WiFi adapter)被禁用,它仅意味着您的系统和路由器之间存在通信问题。(communication problem)您使用另一台 PC 或移动设备(PC or mobile)来检查您是否能够连接到此网络,如果您能够在使用相同网络连接的其他设备上使用(network connection)Internet ,则问题仅出在您的系统(System)上。
您可能会收到以下错误:
此连接具有有限连接或没有连接。无法上网(This connection has limited or no connectivity. No internet access)
连接受限(The connection is limited)
因此,如果只有您的系统无法连接到互联网,那么这是一个严重的问题,因为您将无法访问互联网,并且为了解决有限的连接问题(connectivity problem),您需要按照下面列出的故障排除步骤进行操作。
WiFi 受限连接问题 [已解决]
确保(Make)创建一个还原点(restore point) 以防万一(case something)出现问题。
方法 1:重新启动调制解调器或 WiFi 适配器(Method 1: Restart your modem or WiFi adapter)
有时,只需重新启动Wifi 调制解调器或路由器(Wifi modem or router)即可解决此错误,然后再次尝试访问互联网,看看您是否能够修复WiFi 受限连接问题(WiFi Limited Connectivity Problem)。如果您仍然面临问题,请继续使用下一种方法。
为了访问您的路由器管理页面(router admin page),您需要知道默认IP 地址(IP address)、用户名和密码。如果您不知道,请查看是否可以从此列表中获取默认路由器 IP 地址(default router IP address from this list)。如果不能,则需要使用本指南手动查找路由器的 IP 地址。(find the router’s IP address using this guide.)
方法 2:禁用并重新启用您的 WiFi 适配器(Method 2: Disable and Re-Enable your WiFi adapter)
1.按 Windows 键 + R 然后键入ncpa.cpl并按 Enter。
2.右键单击您的无线适配器( wireless adapter)并选择禁用。(Disable.)
3.再次右键单击同一个适配器,这次选择启用。(choose Enable.)
4.重新启动并再次尝试连接到您的无线网络(wireless network),看看问题是否已解决。
Method 3: Flush DNS and Reset TCP/IP
1.右键单击Windows按钮(Windows Button)并选择“命令提示符(管理员)。(Command Prompt(Admin).)“
2.现在键入以下命令并在每个命令后按回车键: (command and press enter)
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3.再次打开管理命令提示符(Admin Command Prompt)并键入以下内容并在每个之后按回车键:
- ipconfig /flushdns
- nbtstat –r
- netsh int ip 重置
- netsh winsock 重置
4.重新启动以应用更改。刷新DNS似乎可以 修复 Windows 10 中的 WiFi 受限连接问题。(Fix WiFi Limited Connectivity Problem in Windows 10.)
Method 4: Reset TCP/IP Autotuning
1.右键单击Windows键(Windows key)并选择“命令提示符(管理员)。(Command Prompt(Admin).)“
2.键入以下命令:
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disabled
netsh int tcp set global rss=enabled
3.现在输入这个命令来验证之前的功能是否被禁用: netsh int tcp show global
4.重启你的电脑。
方法 5:运行 Windows 网络疑难解答(Method 5: Run Windows Networking Troubleshooter)
1.右键单击网络图标并选择(network icon and select)疑难解答。( Troubleshoot Problems.)
2.按照屏幕上的说明进行操作。
3.现在按Windows key + W并输入Troubleshooting,回车。
4.从那里选择“网络和互联网。(Network and Internet.)“
5.在下一个屏幕中单击网络适配器。(Network Adapter.)
6.按照屏幕上的说明修复连接受限问题。(fix Limited Connectivity Problem.)
方法 6:唤醒您的 Wi-Fi 适配器(Method 6: Wake up your Wi-Fi Adapter)
1.按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。
2.展开网络适配器( Network adapters),然后右键单击已安装的网络适配器并选择(network adapter and select) 属性。(Properties.)
3.切换到电源管理选项卡(Power Management Tab),确保取消选中(uncheck)“允许计算机关闭此设备以节省电源”。(Allow the computer to turn off this device to save power.)“
4.单击确定并关闭设备管理器(Device Manager)。
5.现在按Windows Key + I 打开设置,然后 Click System > Power & Sleep.
6.在底部单击附加电源设置。(click Additional power settings.)
7.现在单击您使用的电源计划(power plan)旁边的“更改计划设置”。(Change plan settings)
8.在底部单击“更改高级电源设置。(Change advanced power settings.)“
9.展开无线适配器设置( Wireless Adapter Settings),然后再次展开省电模式。(Power Saving Mode.)
10.接下来,您将看到两种模式,“使用电池”和“插入”。将它们都更改为最高性能。(Maximum Performance.)
11.单击应用(Apply),然后单击确定。重新启动(Ok. Reboot)您的 PC 以保存更改。这将有助于解决WiFi 受限连接问题(WiFi Limited Connectivity Problem),但如果此方法无法完成工作,还有其他方法可以尝试。
方法 7:通过计量连接启用下载(Method 7: Enable Download over metered connections)
1.按 Windows 键 + I 然后单击设备。( Devices.)
2.从左侧菜单(left-hand menu)中确保选择了打印机和扫描仪(Printers & scanners)。
3.现在通过切换开关启用“通过计量连接下载”。(Download over metered connections)
4.重新启动您的 PC 以保存更改。
方法 8:使用谷歌 DNS(Method 8: Use Google DNS)
1.打开控制面板并点击(Control Panel and click)网络和互联网(Network and Internet)。
2.下一步,点击网络和共享中心(Network and Sharing Center),然后点击更改适配器设置。(Change adapter settings.)
3.选择您的 Wi-Fi,然后双击它并选择属性。(Properties.)
4.现在选择Internet Protocol Version 4 (TCP/IPv4)并单击属性。
5.勾选“使用以下DNS服务器地址(Use the following DNS server addresses)”并输入以下内容:
首选 DNS 服务器:8.8.8.8(Preferred DNS server: 8.8.8.8)
备用 DNS 服务器:8.8.4.4(Alternate DNS server: 8.8.4.4)
6.关闭一切,您也许可以解决 WiFi 受限连接问题。(Fix WiFi Limited Connectivity Problem.)
方法 9:禁用 IPv6(Method 9: Disable IPv6)
1.右键单击系统托盘上的WiFi图标(system tray),(WiFi icon)然后单击“打开网络和共享中心”。(Open Network and Sharing Center.)“
2.现在单击您当前的连接以打开设置。(settings.)
注意:如果您无法连接到网络,请使用以太网电缆(Ethernet cable)连接并按照此步骤操作。
3.在刚刚打开的窗口中单击属性按钮(Properties button)。
4.确保uncheck Internet Protocol Version 6 (TCP/IP).
5.单击确定,然后单击关闭(Close)。重新启动(Reboot)您的 PC 以保存更改。这应该可以解决您的WiFi 受限连接问题(WiFi Limited Connectivity Problem),并且您应该可以再次访问 Internet,但如果没有帮助(t helpful),请继续执行下一步。
方法 10:取消选中代理选项(Method 10: Uncheck Proxy Option)
1.按 Windows 键 + R 然后键入“ inetcpl.cpl ”并按回车键打开Internet 属性。(Internet Properties.)
2.下一步,转到连接选项卡(Connections tab)并选择局域网设置。
3.取消选中为您的局域网(LAN)使用(Use)代理服务器(Proxy Server)并确保选中“自动检测设置(Automatically detect settings)”。
4.单击确定然后应用(Apply)并重新启动您的PC。
方法 11:卸载网络适配器(Method 11: Uninstall Network Adapter)
1.按 Windows 键 + R 然后键入“ devmgmt.msc ”并按Enter打开设备管理器(Device Manager)。
2.展开网络适配器并找到您的网络适配器名称。(your network adapter name.)
3. 确保记下适配器名称(note down the adapter name),以防万一出现问题。
4.右键单击您的网络适配器(network adapter)并将其卸载。
5.如果要求确认选择是。( select Yes.)
6.重新启动您的 PC 并尝试重新连接到您的网络。
7.如果您无法连接到您的网络,则表示驱动程序软件(driver software)没有自动安装。
8.现在您需要访问制造商的网站并从那里下载驱动程序。(download the driver)
9.安装驱动程序并重新启动您的PC。
通过重新安装网络适配器(network adapter),您可以摆脱这个WiFi 受限连接问题(WiFi Limited Connectivity Problem)。
方法 12:更新 WiFi 驱动程序(Method 12: Update WiFi Drivers)
1.按Windows键+R,在运行对话框中输入“ devmgmt.msc ”打开(devmgmt.msc)设备管理器。(device manager.)
2.展开网络适配器(Network adapters),然后右键单击您的Wi-Fi 控制器( Wi-Fi controller)(例如 Broadcom 或 Intel(example Broadcom or Intel))并选择更新驱动程序。(Update Drivers.)
3.在更新驱动程序软件窗口(Update Driver Software Windows)中,选择“(select “)浏览我的电脑以查找驱动程序软件。(Browse my computer for driver software.)“
4.现在选择“让我从计算机上的设备驱动程序列表中选择。(Let me pick from a list of device drivers on my computer.)“
5.尝试从列出的版本更新驱动程序。(update drivers from the listed versions.)
6.如果以上(above didn)都不起作用,请到制造商网站(manufacturers website)更新驱动程序:https://downloadcenter.intel.com/
7.重新启动(Reboot)以应用更改。
方法 13:禁用 WiFi 感知(Method 13: Disable WiFi Sense)
1.按Windows Key + I 打开设置(Settings),然后单击网络和 Internet。(Network & Internet.)
2.现在单击左侧窗格窗口(left pane window)中的Wi-Fi ,并确保在右侧窗口中禁用 Wi-Fi Sense 下的所有内容( Disable everything under Wi-Fi Sense)。
3.此外,请确保禁用Hotspot 2.0 网络和付费 Wi-Fi 服务。(Hotspot 2.0 networks and Paid Wi-Fi services.)
4.断开您的 Wi-Fi 连接,然后再次尝试重新连接。看看您是否能够 在 Windows 10 中修复 WiFi 受限连接问题。(Fix WiFi Limited Connectivity Problem in Windows 10.)
方法 14:更改 Bitdefender 防火墙设置(或您的防病毒防火墙)(Method 14: Change Bitdefender firewall settings (Or your Antivirus Firewall))
1.打开Bitdefender Internet Security(Bitdefender Internet Security)的设置并选择防火墙。(Firewall.)
2.点击“高级设置(Advanced Settings)”按钮。
3.确保选中“启用 Internet 连接共享(Enable Internet Connection Sharing)”。
注意:(NOTE:)如果您没有上述设置,请禁用“阻止 Internet 连接共享(Block Internet Connection Sharing)”而不是上述设置。
4.单击确定按钮保存更改。
5.如果它不起作用(t work),请尝试禁用您的防病毒防火墙(Antivirus Firewall)并启用 Windows 防火墙。( enabling Windows Firewall.)
对于大多数人来说,更改防火墙设置修复了 受限连接问题(Limited Connectivity Problem),但如果对您不起作用,请不要失去希望,我们还有很长的路要走,所以请遵循下一个方法。
方法 15:更改适配器设置(Method 15: Change Adapters Settings)
1.打开Bitdefender,然后选择保护模块(Protection module)并点击防火墙功能。(Firewall feature.)
2.确保防火墙已打开,然后转到适配器选项卡( Adapters tab)并执行以下更改:
Set Network type to "Home/Office"
Set Stealth Mode to "Off"
Set Generic to "On"
3.重新启动您的 PC 以应用这些更改,并查看受限连接问题( Limited Connectivity Problem)是否已解决。
方法 16:将漫游积极性设置为最大(Method 16: Set Roaming Aggressiveness to Maximum)
1.右键单击网络图标(Network icon)并选择“打开(Open) 网络和共享中心”。(Network and Sharing Center.)“
2.现在选择您的Wi-Fi并单击属性。(Properties.)
3.在 Wi-Fi 属性中单击配置。( Configure.)
4.导航到高级选项卡( the Advanced tab)并找到漫游侵略性(Roaming Aggressiveness)设置。
5. 将值从“中”更改为“最高”(Medium to Highest),然后单击“确定”。
6.重新启动(Reboot)以应用更改。
Method 17: Disable Intel PROSet/Wireless WiFi Connection Utility
1.按Windows Key + X然后选择控制面板。(Control Panel.)
2.然后点击网络和Internet( Network and Internet) >查看网络状态和任务。(View network status and task.)
3.现在在左下角单击 Intel PROset/Wireless Tools.
4.接下来,打开英特尔 WiFi 热点助手(Intel WiFi Hotspot Assistant)的设置,然后取消选中“启用英特尔热点助手”。(Enable Intel Hotspot Assistant.)“
5.单击确定并重新启动您的 PC 以修复 WiFi 受限连接问题。(Fix WiFi Limited Connectivity Problem.)
方法 18:删除 Wlansvc 文件(Method 18: Delete Wlansvc Files)
1.按 Windows 键 + R 然后键入services.msc并按 Enter。
2.向下滚动直到找到WWAN AutoConfig然后右键单击它并选择Stop。
3.再次按Windows Key + R,然后键入“ C:\ProgramData\Microsoft\Wlansvc\ ”(不带引号)并按 Enter。
4.删除Wlansvc 文件夹中除配置文件外的(Wlansvc folder except for profiles.)所有内容(很可能是MigrationData 文件夹(MigrationData folder)) 。
5.现在打开Profiles 文件夹(Profiles folder)并删除除Interfaces 之外的所有内容。( Interfaces.)
6.同样,打开Interfaces文件夹,然后删除其中的所有内容。
7.关闭文件资源管理器(File Explorer),然后在服务窗口中右键单击WLAN AutoConfig并选择开始。(Start.)
方法 19:忘记 WiFi 网络(Method 19: Forget WiFi Network)
1.单击系统托盘(system tray)中的无线图标(Wireless icon),然后单击网络设置。(Network Settings.)
2.然后单击管理已知网络( Manage Known networks)以获取已保存网络的列表。
3.现在选择Windows 10不会记住密码的那个,然后单击忘记。(click Forget.)
4.再次单击系统托盘中的无线图标( wireless icon)并连接(system tray and connect)到您的网络,它会要求输入密码,因此请确保您随身携带无线密码(Wireless password)。
5.输入密码后,您将连接到网络,Windows(network and Windows)将为您保存该网络。
6.重新启动您的PC并再次尝试连接到同一网络,这一次Windows会记住您的WiFi密码。此方法似乎可以 修复 Windows 10 中的 WiFi 受限连接问题(Fix WiFi Limited Connectivity Problem in Windows 10)。
方法 20:将您的家庭网络标记为私有而不是公共(Method 20: Mark your Home Network as Private instead of Public)
1.单击系统托盘(System Tray.)中的 Wi-Fi 图标。
2.然后再次点击已连接的Wi-Fi网络(Wi-Fi network),弹出子菜单,点击属性。(click Properties.)
3.在“使这台 PC 可被发现(Make this PC discoverable)”下将滑块切换到ON。
4.如果上述方法对您不起作用,请在 Windows 搜索栏中键入家庭组。(Homegroup)
5.单击选项家庭组(HomeGroup),然后单击更改网络位置。(Change network location.)
6.下一步,单击是以使该网络成为专用网络。(Yes to make this network a private network.)
7.现在右键单击系统托盘中的 Wi-Fi 图标,然后选择“(system tray and select “)打开网络和共享中心”。(Open Network and Sharing Center.)“
8.确认列出的网络显示为专用网络( shows as Private Network),然后关闭窗口,您就完成了。
为你推荐:(Recommended for you:)
- 修复(Fix)Windows 10中无法连接(Connect)到此网络问题(network issue)
- 修复(Fix WiFi)Windows 10上 WiFi 不断断开连接的问题
- 如何解决受限访问或无连接WiFi问题
- 修复(Fix)Windows 10 不记得保存的 WiFi 密码(Remember Saved WiFi Password)
就是这样,您已经成功修复了 Windows 10 中的 WiFi 受限连接问题,(Fix WiFi Limited Connectivity Problem in Windows 10 )如果您对这篇文章仍有任何疑问,请随时在评论部分询问他们。
WiFi Limited Connectivity Problem [SOLVED]
Fix WiFi Limited Connectivity Problem: If you’re facing Limited Connectivity error in your WiFi status then you won’t be able to access the internet until you’re again connected to the internet. You’re getting a message of Limited Access when you are connected to your WiFi which means you are connected to your Router/Modem but there is no Internet or worse, internet connection is available but your system is not able to receive it.
The limited connectivity error does not mean that your WiFi adapter is disabled, it only means that there is a communication problem between your system and the router. You use another PC or mobile in order to check if you’re able to connect to this network or not, if you’re able to use the Internet on other devices using the same network connection then the problem is with your System only.
You may receive the following error:
This connection has limited or no connectivity. No internet access
The connection is limited
So if only your system is not able to connect to the internet then it’s a serious issue as you won’t be able to access the internet and in order to fix limited connectivity problem, you need to follow the below-listed troubleshooting steps.
WiFi Limited Connectivity Problem [SOLVED]
Make sure to create a restore point just in case something goes wrong.
Method 1: Restart your modem or WiFi adapter
Sometimes this error can simply be resolved by restarting your Wifi modem or router and again try access the internet and see if you’re able to fix WiFi Limited Connectivity Problem. If you’re still facing the issue then continue with the next method.
In order to access your router admin page you need to know the default IP address, username, and password. If you don’t know then see if you can get the default router IP address from this list. If you can’t then you need to manually find the router’s IP address using this guide.
Method 2: Disable and Re-Enable your WiFi adapter
1.Press Windows Key + R then type ncpa.cpl and hit Enter.
2.Right-click on your wireless adapter and select Disable.
3.Again right-click on the same adapter and this time choose Enable.
4.Restart your and again try to connect to your wireless network and see if the issue is resolved or not.
Method 3: Flush DNS and Reset TCP/IP
1.Right-click on Windows Button and select “Command Prompt(Admin).“
2.Now type the following command and press enter after each one:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3.Again open Admin Command Prompt and type the following and hit enter after each one:
- ipconfig /flushdns
- nbtstat –r
- netsh int ip reset
- netsh winsock reset
4.Reboot to apply changes. Flushing DNS seems to Fix WiFi Limited Connectivity Problem in Windows 10.
Method 4: Reset TCP/IP Autotuning
1.Right-click on Windows key and select “Command Prompt(Admin).“
2.Type the following commands:
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disabled
netsh int tcp set global rss=enabled
3.Now enter this command to verify that previous functions were disabled: netsh int tcp show global
4.Reboot your PC.
Method 5: Run Windows Networking Troubleshooter
1.Right-click on the network icon and select Troubleshoot Problems.
2.Follow the on-screen instructions.
3.Now press Windows key + W and type Troubleshooting, hit enter.
4.From there select “Network and Internet.“
5.In the next screen click on Network Adapter.
6.Follow the on-screen instruction to fix Limited Connectivity Problem.
Method 6: Wake up your Wi-Fi Adapter
1.Press Windows Key + R then type devmgmt.msc and hit Enter.
2.Expand Network adapters then right-click on your installed network adapter and select Properties.
3.Switch to Power Management Tab and make sure to uncheck “Allow the computer to turn off this device to save power.“
4.Click Ok and close the Device Manager.
5.Now press Windows Key + I to open Settings then Click System > Power & Sleep.
6.On the bottom click Additional power settings.
7.Now click “Change plan settings” next to the power plan which you use.
8.At the bottom click on “Change advanced power settings.“
9.Expand Wireless Adapter Settings, then again expand Power Saving Mode.
10.Next, you will see two modes, ‘On battery’ and ‘Plugged in.’ Change both of them to Maximum Performance.
11.Click Apply followed by Ok. Reboot your PC to save changes. This would help to resolve WiFi Limited Connectivity Problem but there are other methods to try if this one fails to do its job.
Method 7: Enable Download over metered connections
1.Press Windows Key + I then click Devices.
2.From the left-hand menu make sure Printers & scanners is selected.
3.Now enable “Download over metered connections” by toggling the switch.
4.Reboot your PC to save changes.
Method 8: Use Google DNS
1.Open Control Panel and click on Network and Internet.
2.Next, click Network and Sharing Center then click on Change adapter settings.
3.Select your Wi-Fi then double click on it and select Properties.
4.Now select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
5.Check mark “Use the following DNS server addresses” and type the following:
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4
6.Close everything and you may be able to Fix WiFi Limited Connectivity Problem.
Method 9: Disable IPv6
1.Right click on WiFi icon on system tray and then click on “Open Network and Sharing Center.“
2.Now click on your current connection in order to open settings.
Note: If you can’t connect to your network then use Ethernet cable to connect and the follow this step.
3.Click Properties button in the window that just open.
4.Make sure to uncheck Internet Protocol Version 6 (TCP/IP).
5.Click OK then click Close. Reboot your PC to save changes. This should resolve your WiFi Limited Connectivity Problem and you should again able to access the internet but if it wasn’t helpful then continue to the next step.
Method 10: Uncheck Proxy Option
1.Press Windows Key + R then type “inetcpl.cpl” and hit enter to open Internet Properties.
2.Next, Go to Connections tab and select LAN settings.
3.Uncheck Use a Proxy Server for your LAN and make sure “Automatically detect settings” is checked.
4.Click Ok then Apply and reboot your PC.
Method 11: Uninstall Network Adapter
1.Press Windows Key + R then type “devmgmt.msc” and hit Enter to open Device Manager.
2.Expand Network Adapters and find your network adapter name.
3.Make sure you note down the adapter name just in case something goes wrong.
4.Right-click on your network adapter and uninstall it.
5.If ask for confirmation select Yes.
6.Restart your PC and try to reconnect to your network.
7.If you’re not able to connect to your network then it means the driver software isn’t automatically installed.
8.Now you need to visit your manufacturer’s website and download the driver from there.
9.Install the driver and reboot your PC.
By reinstalling the network adapter, you can get rid out of this WiFi Limited Connectivity Problem.
Method 12: Update WiFi Drivers
1.Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open device manager.
2.Expand Network adapters, then right-click on your Wi-Fi controller(for example Broadcom or Intel) and select Update Drivers.
3.In the Update Driver Software Windows, select “Browse my computer for driver software.“
4.Now select “Let me pick from a list of device drivers on my computer.“
5.Try to update drivers from the listed versions.
6.If the above didn’t work then go to manufacturers website to update drivers: https://downloadcenter.intel.com/
7.Reboot to apply changes.
Method 13: Disable WiFi Sense
1.Press Windows Key + I to open Settings then click on Network & Internet.
2.Now click Wi-Fi in the left pane window and make sure to Disable everything under Wi-Fi Sense in the right window.
3.Also, make sure to disable Hotspot 2.0 networks and Paid Wi-Fi services.
4.Disconnect your Wi-Fi connection and then again try to reconnect. See if you’re able to Fix WiFi Limited Connectivity Problem in Windows 10.
Method 14: Change Bitdefender firewall settings (Or your Antivirus Firewall)
1.Open Settings of Bitdefender Internet Security and choose Firewall.
2.Click on “Advanced Settings” button.
3.Make sure that “Enable Internet Connection Sharing” is checked.
NOTE: If you don’t have the above setting then disable “Block Internet Connection Sharing” instead of above.
4.Click OK button to save changes.
5.And if it doesn’t work try disabling your Antivirus Firewall and enabling Windows Firewall.
For maximum people changing firewall settings fixes the Limited Connectivity Problem, but if didn’t work for you don’t lose hope we still have a long way to go, so follow the next method.
Method 15: Change Adapters Settings
1.Open the Bitdefender, then select Protection module and click on the Firewall feature.
2.Make sure the Firewall is turned ON and then go to the Adapters tab and perform the following changes:
Set Network type to "Home/Office"
Set Stealth Mode to "Off"
Set Generic to "On"
3.Restart your PC to apply these changes and see if the Limited Connectivity Problem is resolved or not.
Method 16: Set Roaming Aggressiveness to Maximum
1.Right click on Network icon and select “Open Network and Sharing Center.“
2.Now select your Wi-Fi and click on Properties.
3.Inside Wi-Fi properties click on Configure.
4.Navigate to the Advanced tab and find Roaming Aggressiveness setting.
5.Change the value from Medium to Highest and click OK.
6.Reboot to apply changes.
Method 17: Disable Intel PROSet/Wireless WiFi Connection Utility
1.Press Windows Key + X then select Control Panel.
2.Then click on Network and Internet > View network status and task.
3.Now on the bottom left corner click on Intel PROset/Wireless Tools.
4.Next, open settings on Intel WiFi Hotspot Assistant then uncheck “Enable Intel Hotspot Assistant.“
5.Click OK and reboot your PC to Fix WiFi Limited Connectivity Problem.
Method 18: Delete Wlansvc Files
1.Press Windows Key + R then type services.msc and hit Enter.
2.Scroll down till you find WWAN AutoConfig then right-click on it and select Stop.
3.Again press Windows Key + R then type “C:\ProgramData\Microsoft\Wlansvc\” (without quotes) and hit Enter.
4.Delete everything (most probably the MigrationData folder) in the Wlansvc folder except for profiles.
5.Now open the Profiles folder and delete everything except the Interfaces.
6.Similarly, open Interfaces folder then delete everything inside it.
7.Close File Explorer, then in services window right-click on WLAN AutoConfig and select Start.
Method 19: Forget WiFi Network
1.Click on the Wireless icon in the system tray and then click Network Settings.
2.Then click on Manage Known networks to get the list of saved networks.
3.Now select the one which Windows 10 won’t remember the password for and click Forget.
4.Again click the wireless icon in the system tray and connect to your network, it will ask for the password, so make sure you have the Wireless password with you.
5.Once you have entered the password you will connect to the network and Windows will save this network for you.
6.Reboot your PC and again try to connect to the same network and this time Windows will remember the password of your WiFi. This method seems to Fix WiFi Limited Connectivity Problem in Windows 10.
Method 20: Mark your Home Network as Private instead of Public
1.Click on the Wi-Fi icon in the System Tray.
2.Then again click on the connected Wi-Fi network to bring out the sub menu and click Properties.
3.Under “Make this PC discoverable” toggle slider to ON.
4.If above didn’t work for you then type Homegroup in Windows Search bar.
5.Click the option HomeGroup and then click Change network location.
6.Next, Click Yes to make this network a private network.
7.Now right-click on the Wi-Fi icon in the system tray and select “Open Network and Sharing Center.“
8.Verify that the network listed shows as Private Network then close the window and you’re done.
Recommended for you:
That’s it you have successfully Fix WiFi Limited Connectivity Problem in Windows 10 if you still have any queries regarding this post feel free to ask them in the comment’s section.