修复 IRQL_NOT_LESS_OR_EQUAL 错误

如果您在错误检查中遇到上述错误代码^{(error code)}，其值为 0x0000000A，则这表明内核模式驱动程序在提升的中断请求级别^{(interrupt request level)}( IRQL ) 时访问了无效地址的分页内存。简而言之，驱动程序试图访问它没有必要权限的内存地址。^{(memory address)}

修复 IRQL_NOT_LESS_OR_EQUAL 错误

当这发生在用户应用程序中时，它会生成访问冲突错误消息^{(access violation error message)}。当这种情况发生在内核模式下时，它会生成一个STOP 错误代码 0x0000000A^{(STOP error code 0x0000000A)}。如果您在升级到较新版本的Windows^(Windows)时遇到此错误，可能是由损坏或过时的设备驱动程序^{(device driver)}、病毒或恶意软件^{(virus or malware)}、防病毒问题、损坏的系统文件^{(system file)}等引起的。

修复 Windows 10 上的 IRQL_NOT_LESS_OR_EQUAL 错误

如果内存和内存总线控制器^{(memory and memory bus controller)}之间不匹配，也会出现此错误，这可能导致意外 I/O 故障、大量 I/O 操作期间内存位翻转或^{(memory bit-flipping)}环境温度^{(ambient temperature)}升高时。因此，不要浪费任何时间，让我们^{(time let)}看看如何在下面列出的故障排除指南的帮助下实际修复Windows 10上的IRQL_NOT_LESS_OR_EQUAL 错误。^{(Fix IRQL_NOT_LESS_OR_EQUAL error)}

修复 IRQL_NOT_LESS_OR_EQUAL 错误

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

方法 1：执行干净启动^{(Method 1: Perform a Clean Boot)}

有时，第 3方软件^{(party software)}可能与Windows发生冲突，并可能导致蓝屏^{(Blue Screen)}死机错误^{(Death error)}。要修复 IRQL_NOT_LESS_OR_EQUAL 错误^{(Fix IRQL_NOT_LESS_OR_EQUAL Error)}，您需要在 PC 上执行干净启动并逐步诊断问题^{(issue step)}。

方法 2：运行 Windows 内存诊断程序^{(Method 2: Run Windows Memory Diagnostics)}

注意：^(Note:)如果您的主板的BIOS具有内存缓存功能^{(Memory Caching feature)}，您应该从BIOS 设置^{(BIOS setup)}中将其禁用。

1. 在Windows 搜索^{(Windows search)}栏中输入内存并选择“ Windows 内存诊断”。^{(Windows Memory Diagnostic.)}”

2. 在显示的选项集中选择“立即重新启动并检查问题。”^{(“Restart now and check for problems.“)}

运行windows内存诊断| 修复 IRQL_NOT_LESS_OR_EQUAL 错误

3. 之后Windows将重新启动以检查可能的 RAM 错误，并希望显示您收到IRQL_NOT_LESS_OR_EQUAL蓝屏^{(IRQL_NOT_LESS_OR_EQUAL Blue Screen)}死机^(Death)( BSOD )错误消息^{(error message)}的可能原因。

4. 重新启动您的 PC 以保存更改。

Method 3: Run Memtest86+

注意：^(Note:)在开始之前，请确保您可以访问另一台 PC，因为您需要下载Memtest86+并将其刻录到光盘或 USB^{(disc or USB)}闪存驱动器。

1. 将USB 闪存^{(USB flash)}驱动器连接到您的系统。

2. 下载并安装适用于 USB Key 的Windows Memtest86 自动安装程序^{(Windows Memtest86 Auto-installer for USB Key)}。

3. 右键单击刚刚下载的图像文件^{(image file)}并选择“在此处提取^{(Extract here)}”选项。

4. 解压后，打开文件夹并运行Memtest86+ USB Installer。

5.选择你插入的U盘^{(USB drive)}烧录MemTest86软件^{(MemTest86 software)}（这将格式化你的U盘^{(USB drive)}）。

memtest86 USB 安装工具

6. 上述过程完成后，将USB插入PC， 出现 IRQL_NOT_LESS_OR_EQUAL 错误。^{( IRQL_NOT_LESS_OR_EQUAL Error.)}

7. 重新启动您的 PC 并确保选择从USB 闪存^{(USB flash)}驱动器启动。

8. Memtest86将开始测试您系统中的内存损坏^{(memory corruption)}。

内存测试86

9. 如果你通过了所有的测试，你可以确定你的记忆是正常工作的。

10.如果某些步骤不成功，那么Memtest86会发现内存损坏^{(memory corruption)}，这意味着您的“IRQL_NOT_LESS_OR_EQUAL”是由于内存损坏/损坏。

11.为了修复 IRQL_NOT_LESS_OR_EQUAL 错误^{( Fix IRQL_NOT_LESS_OR_EQUAL Error)}，如果发现坏内存扇区，您将需要更换您的RAM 。

方法 4：运行驱动程序验证程序^{(Method 4: Run Driver Verifier)}

仅当您可以正常登录Windows时，此方法才有用，而不是在安全模式下。接下来，确保创建一个系统还原点^{(System Restore point)}。

运行驱动程序验证管理器

按顺序运行驱动程序验证程序修复 IRQL_NOT_LESS_OR_EQUAL 错误。^{(Fix IRQL_NOT_LESS_OR_EQUAL Error.)}这将消除可能发生此错误的任何冲突驱动程序问题。

方法 5：执行系统还原^{(Method 5: Perform System Restore)}

1. 按 Windows 键 + R 并输入system.cpl 然后回车。

系统属性修复 IRQL_NOT_LESS_OR_EQUAL 错误

2. 选择系统保护^{(System Protection)}选项卡并选择系统还原。^{( System Restore.)}

系统属性中的系统还原

3.单击下一步^{(Click Next)}并选择所需的系统还原点^{(System Restore point)}。

系统还原

4. 按照屏幕提示完成系统还原^{(system restore)}。

5. 重启后，您可能能够修复 IRQL_NOT_LESS_OR_EQUAL 错误。^{(Fix IRQL_NOT_LESS_OR_EQUAL Error.)}

方法 6：运行 CCleaner 和 Malwarebytes^{(Method 6: Run CCleaner and Malwarebytes)}

1. 下载并安装 CCleaner & Malwarebytes。

2. 运行 Malwarebytes^{(Run Malwarebytes)}并让它扫描您的系统以查找有害文件。如果发现恶意软件，它将自动删除它们。

运行 Malwarebytes Anti-Malware 后单击立即扫描

3. 现在运行 CCleaner 并选择 Custom Clean。

4. 在自定义清理下，选择 Windows 选项卡^{(Windows tab)}并勾选默认值，然后单击分析^(Analyze)。

选择自定义清理，然后在 Windows 选项卡中选中默认值 | 修复 IRQL_NOT_LESS_OR_EQUAL 错误

5. 分析完成后，确保您确定要删除要删除的文件。^{(Once Analyze is complete, make sure you’re certain to remove the files to be deleted.)}

单击运行清理程序以删除文件

6. 最后，点击 Run Cleaner 按钮，让CCleaner运行。

7. 要进一步清理您的系统，请 选择注册表选项卡^{(select the Registry tab)}，并确保选中以下内容：

选择注册表选项卡，然后单击扫描问题

8. 点击 Scan for Issues 按钮并允许CCleaner扫描，然后点击 Fix Selected Issues 按钮。

完成问题扫描后，单击修复选定的问题 | 修复 IRQL_NOT_LESS_OR_EQUAL 错误

9. 当 CCleaner 询问“您要备份对注册表的更改吗？^{(Do you want backup changes to the registry?)}” 选择是^{( select Yes)}。

10. 备份完成后，单击 修复所有选定问题^{(Fix All Selected Issues)} 按钮。

11. 重新启动您的 PC 以保存更改。

方法 7：运行 SFC 和 DISM^{(Method 7: Run SFC and DISM)}

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

打开命令提示符。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

SFC 立即扫描命令提示符 | 修复 IRQL_NOT_LESS_OR_EQUAL 错误

3.等待^(Wait)上述过程完成，完成后，重新启动PC。

4. 接下来，运行 CHKDSK来修复文件系统错误^{(Fix File System Errors)}。

5. 让上述过程完成并再次重新启动您的 PC 以保存更改。

方法8：修复安装Windows 10^{(Method 8: Repair Install Windows 10)}

此方法是最后的手段，因为如果没有任何效果，此方法肯定会修复您 PC 的所有问题并修复 IRQL_NOT_LESS_OR_EQUAL 错误。^{(Fix IRQL_NOT_LESS_OR_EQUAL Error.)} 修复安装^{(Repair Install)}使用就地升级来修复系统问题，而不会删除系统上存在的用户数据。因此，请按照本文查看如何轻松^(Easily)修复^(How)安装Windows 10^{(Repair Install Windows 10)} 。

推荐的^{(Recommended)}

修复计算机^{(Fix Computer)}在 Windows 10 上随机重启
如何从Windows 10文件资源管理器中删除^{(File Explorer)}OneDrive
修复鼠标光标^{(Fix Mouse Cursor Disappears)}在Windows 10中消失的问题^{(Windows 10)}
修复缺少^{(Fix Missing Open)}从右键单击上下文菜单中打开的^{(Right-click Context Menu)}选项^(Option)

就是这样，您已成功修复 Windows 10 上的 IRQL_NOT_LESS_OR_EQUAL 错误，^{(Fix IRQL_NOT_LESS_OR_EQUAL Error on Windows 10)}但如果您对这篇文章仍有任何疑问，请随时在评论部分询问他们。

Fix IRQL_NOT_LESS_OR_EQUAL Error

If you face the above error code with bug check with a value of 0x0000000A, then this indiсates that a kernel-modе driver accessed paged memory at an invalid аddress while at a raised іnterrupt request level (IRQL). In short, thе driver аttempted to access a memory address to whiсh it did not have the necessary permission.

When this occurs in a user application, it generates an access violation error message. When this happens in a kernel-mode, then it generates a STOP error code 0x0000000A. If you face this error while upgrading to a newer version of Windows, it might be caused by the corrupted or outdated device driver, virus or malware, antivirus issues, corrupt system file, etc.

Fix IRQL_NOT_LESS_OR_EQUAL Error on Windows 10

This error also occurs if there is a mismatch between memory and memory bus controller which can lead to unexpected I/O failures, memory bit-flipping during heavy I/O operations, or when the ambient temperature is raised. So without wasting any time let’s see how to actually Fix IRQL_NOT_LESS_OR_EQUAL error on Windows 10 with the help of below-listed troubleshooting guide.

Fix IRQL_NOT_LESS_OR_EQUAL Error

Make sure to create a restore point just in case something goes wrong.

Method 1: Perform a Clean Boot

Sometimes 3rd party software can conflict with Windows and can cause Blue Screen of Death error. To Fix IRQL_NOT_LESS_OR_EQUAL Error, you need to perform a clean boot on your PC and diagnose the issue step by step.

Method 2: Run Windows Memory Diagnostics

Note: If your motherboard’s BIOS has the Memory Caching feature, you should disable it from BIOS setup.

1. Type memory in the Windows search bar and select “Windows Memory Diagnostic.”

2. In the set of options displayed select “Restart now and check for problems.“

run windows memory diagnostic | Fix IRQL_NOT_LESS_OR_EQUAL Error

3. After which Windows will restart to check for possible RAM errors and hopefully display the possible reasons you get the IRQL_NOT_LESS_OR_EQUAL Blue Screen of Death (BSOD) error message.

4. Reboot your PC to save changes.

Method 3: Run Memtest86+

Note: Before starting, make sure you have access to another PC as you will need to download and burn Memtest86+ to the disc or USB flash drive.

1. Connect a USB flash drive to your system.

2. Download and install Windows Memtest86 Auto-installer for USB Key.

3. Right-click on the image file which you just downloaded and selected “Extract here” option.

4. Once extracted, open the folder and run the Memtest86+ USB Installer.

5. Choose you are plugged in USB drive to burn the MemTest86 software (This will format your USB drive).

memtest86 usb installer tool

6. Once the above process is finished, insert the USB to the PC, giving the IRQL_NOT_LESS_OR_EQUAL Error.

7. Restart your PC and make sure that boot from the USB flash drive is selected.

8. Memtest86 will begin testing for memory corruption in your system.

Memtest86

9. If you have passed all the test, you can be sure that your memory is working correctly.

10.If some of the steps were unsuccessful, then Memtest86 will find memory corruption which means that your “IRQL_NOT_LESS_OR_EQUAL” is because of bad/corrupt memory.

11.In order to Fix IRQL_NOT_LESS_OR_EQUAL Error, you will need to replace your RAM if bad memory sectors are found.

Method 4: Run Driver Verifier

This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.

run driver verifier manager

Run Driver Verifier in order Fix IRQL_NOT_LESS_OR_EQUAL Error. This would eliminate any conflicting driver issues due which this error can occur.

Method 5: Perform System Restore

1. Press Windows Key + R and type system.cpl then hit enter.

system properties sysdm | Fix IRQL_NOT_LESS_OR_EQUAL Error

2. Select the System Protection tab and choose System Restore.

system restore in system properties

3. Click Next and choose the desired System Restore point.

system-restore

4. Follow the on-screen instruction to complete system restore.

5. After reboot, you may be able to Fix IRQL_NOT_LESS_OR_EQUAL Error.

Method 6: Run CCleaner and Malwarebytes

1. Download and install CCleaner & Malwarebytes.

2. Run Malwarebytes and let it scan your system for harmful files. If malware is found, it will automatically remove them.

Click on Scan Now once you run the Malwarebytes Anti-Malware

3. Now run CCleaner and select Custom Clean.

4. Under Custom Clean, select the Windows tab and checkmark defaults and click Analyze.

Select Custom Clean then checkmark default in Windows tab | Fix IRQL_NOT_LESS_OR_EQUAL Error

5. Once Analyze is complete, make sure you’re certain to remove the files to be deleted.

Click on Run Cleaner to deleted files

6. Finally, click on the Run Cleaner button and let CCleaner run its course.

7. To further clean your system, select the Registry tab, and ensure the following are checked:

Select Registry tab then click on Scan for Issues

8. Click on the Scan for Issues button and allow CCleaner to scan, then click on the Fix Selected Issues button.

Once scan for issues is completed click on Fix selected Issues | Fix IRQL_NOT_LESS_OR_EQUAL Error

9. When CCleaner asks “Do you want backup changes to the registry?” select Yes.

10. Once your backup has completed, click on the Fix All Selected Issues button.

11. Restart your PC to save changes.

Method 7: Run SFC and DISM

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

SFC scan now command prompt | Fix IRQL_NOT_LESS_OR_EQUAL Error

3. Wait for the above process to finish and once done, restart your PC.

4. Next, run CHKDSK to Fix File System Errors.

5. Let the above process complete and again reboot your PC to save changes.

Method 8: Repair Install Windows 10

This method is the last resort because if nothing works out, this method will surely repair all problems with your PC and Fix IRQL_NOT_LESS_OR_EQUAL Error. Repair Install uses an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily.

Recommended

That’s it you have successfully Fix IRQL_NOT_LESS_OR_EQUAL Error on Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.

瑛武

About the author

我是一名专业的音频工程师，拥有超过 10 年的经验。我参与过各种各样的项目，从小型家庭音响系统到大型商业制作。我的技能在于创造出色的配乐和声音处理工具，让音乐听起来很棒。我对 Windows 10 也非常有经验，可以帮助您充分利用您的计算机系统。

修复 IRQL_NOT_LESS_OR_EQUAL 错误

修复 IRQL_NOT_LESS_OR_EQUAL 错误

方法 1：执行干净启动(Method 1: Perform a Clean Boot)

方法 2：运行 Windows 内存诊断程序(Method 2: Run Windows Memory Diagnostics)

Method 3: Run Memtest86+

方法 4：运行驱动程序验证程序(Method 4: Run Driver Verifier)

方法 5：执行系统还原(Method 5: Perform System Restore)

方法 6：运行 CCleaner 和 Malwarebytes(Method 6: Run CCleaner and Malwarebytes)

方法 7：运行 SFC 和 DISM(Method 7: Run SFC and DISM)

方法8：修复安装Windows 10(Method 8: Repair Install Windows 10)

Fix IRQL_NOT_LESS_OR_EQUAL Error

Fix IRQL_NOT_LESS_OR_EQUAL Error

Method 1: Perform a Clean Boot

Method 2: Run Windows Memory Diagnostics

Method 3: Run Memtest86+

Method 4: Run Driver Verifier

Method 5: Perform System Restore

Method 6: Run CCleaner and Malwarebytes

Method 7: Run SFC and DISM

Method 8: Repair Install Windows 10

瑛 武

About the author

Related posts

Fix Error 0X80010108在Windows 10中

如何Fix Application Error 0xc0000005

Fix Windows Update Error Code 0x80072efe

如何Fix Application Load Error 5:0000065434

Fix BAD_SYSTEM_CONFIG_INFO Error

Fix Could不是Steam Network Error的Connect

Fix Office Activation Error Code 0xC004F074

Fix USB Error Code 52 Windows无法验证数字签名

Fix PAGE_FAULT_IN_NONPAGED_AREA Error

Fix Omegle Error Connecting至Server（2021）

6 Ways至Fix Pending Transaction Steam Error

Fix Windows 10 Store Error 0x80073cf9

Windows 10上的Fix Device不是Migrated Error

如何Fix Google Drive Access Denied Error

Fix Media Disconnected Error在Windows 10上

Fix Windows Store Error Code 0x803F8001

Fix Windows Installer Access Denied Error

Fix Error 0x8007000e Preventing Backups

Fix Windows Update Error 0x80070020

Device Manager中的Fix Network Adapter Error Code 31

方法 1：执行干净启动^{(Method 1: Perform a Clean Boot)}

方法 2：运行 Windows 内存诊断程序^{(Method 2: Run Windows Memory Diagnostics)}

方法 4：运行驱动程序验证程序^{(Method 4: Run Driver Verifier)}

方法 5：执行系统还原^{(Method 5: Perform System Restore)}

方法 6：运行 CCleaner 和 Malwarebytes^{(Method 6: Run CCleaner and Malwarebytes)}

方法 7：运行 SFC 和 DISM^{(Method 7: Run SFC and DISM)}

方法8：修复安装Windows 10^{(Method 8: Repair Install Windows 10)}

瑛武