在 Windows 10 中检查磁盘是否使用 MBR 或 GPT 分区的 3 种方法： ^{(3 Ways to Check if a Disk Uses MBR or GPT Partition in Windows 10: )}即有两种硬盘分区^{(disk partition)}样式GPT（GUID 分区表）^{(GPT (GUID Partition Table))}和MBR（主引导记录）^{(MBR (Master Boot Record))}可用于磁盘。现在，大多数Windows 10用户都不知道^{(t aware)}他们正在使用哪个分区，因此，本教程将帮助他们确定他们使用的是MBR 还是 GPT 分区样式^{(MBR or GPT Partition style)}。现代版本的Windows使用GPT 分区^{(GPT partition)}，这是在UEFI 模式下^{(UEFI mode)}启动Windows所必需的。

而^(Whereas)较旧的Windows操作系统使用将Windows引导到BIOS 模式^{(BIOS mode)}所需的MBR。两种分区样式只是将分区表^{(partition table)}存储在驱动器上的不同方式。主引导记录^{(Master Boot Record)}( MBR ) 是位于驱动器开头的特殊引导扇区^{(boot sector)}，其中包含有关已安装操作系统的引导加载程序和驱动器逻辑分区的信息。MBR 分区^{(MBR partition)}样式只能与最大 2TB 的磁盘一起使用，并且最多只能支持四个主分区。

GUID 分区表^{(GUID Partition Table)}( GPT ) 是一种替代旧MBR的新分区样式^{(partition style)}，如果您的驱动器是GPT ，那么驱动器上的每个分区都有一个全局唯一标识符或 GUID^{(identifier or GUID)} – 一个随机字符串，如此之长以至于全世界的每个GPT 分区^{(GPT partition)}都有它的自己的唯一标识符。GPT最多支持 128 个分区，而不是MBR 限制的 4 个主分区，GPT^{(MBR and GPT)}在磁盘末尾保留分区表的备份，而^{(partition table)}MBR仅将启动^{(store boot)}数据存储在一个位置。

此外，由于分区表^{(partition table)}的复制和循环冗余校验^{(redundancy check)}( CRC ) 保护， GPT 磁盘^{(GPT disk)}提供了更高的可靠性。简而言之，GPT是目前最好的磁盘分区样式^{(disk partition style)}，它支持所有最新功能，并为您在系统上顺利工作提供更多空间。因此，不要浪费任何时间，让我们^{(time let)}在下面列出的教程的帮助下看看如何在Windows 10中检查^{(Windows 10)}磁盘^(Disk)是否使用MBR 或 GPT 分区。^{(MBR or GPT Partition)}

在Windows 10中检查磁盘^(Disk)是否使用MBR 或 GPT 分区^{(MBR or GPT Partition)}的3种方法^(Ways)

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

方法一：在设备管理器中查看磁盘是使用MBR还是GPT分区^{(Method 1: Check if a Disk Uses MBR or GPT Partition in Device Manager)}

1.按 Windows 键 + R 然后键入devmgmt.msc并按 Enter 打开设备管理器。^{(Device Manager.)}

2.展开磁盘驱动器，然后右键单击^{(right-click on the disk)}要检查的磁盘并选择属性。^{(Properties.)}

3.在磁盘属性下切换到卷选项卡^{(Volumes tab)}，然后单击底部的填充按钮。^{( Populate button)}

4.现在在“分区样式^{(Partition style)}”下查看此磁盘的分区样式^{(Partition style)}是GUID分区表^{(GUID Partition Table)}（GPT）还是主引导记录^{(Master Boot Record)}（MBR）。

方法二：在磁盘管理中查看磁盘是使用MBR还是GPT分区^{(Method 2: Check if a Disk Uses MBR or GPT Partition in Disk Management)}

1.按 Windows 键 + R 然后键入diskmgmt.msc并按 Enter 打开磁盘管理。^{(Disk Management.)}

2.现在 right-click on the “Disk #”您要检查 的“磁盘#” （而不是#会有数字，例如磁盘1或磁盘0 ）并选择^{(Disk 0)}属性。^{(Properties.)}

3.在磁盘属性窗口中切换到卷选项卡。^{(Volumes tab.)}

4.接下来，在“分区样式^{(Partiton style)}”下查看此磁盘的分区样式^{(Partition style)}是GUID分区表（GPT）还是主引导记录（MBR）。^{( GUID Partition Table (GPT) or Master Boot Record (MBR).)}

5.完成后，您可以关闭磁盘管理窗口^{(Disk Management window)}。

这是如何在 Windows 10 中检查磁盘是否使用 MBR 或 GPT 分区^{(How to Check if a Disk Uses MBR or GPT Partition in Windows 10)}，但如果您仍想使用其他方法而不是继续。

方法3：在命令提示符下检查磁盘是否使用MBR或GPT分区^{(Method 3: Check if a Disk Uses MBR or GPT Partition in Command Prompt)}

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.一一键入以下命令^{(command one)}，并在每个命令后按Enter ：

diskpart
列出磁盘^{(list disk)}

3.现在您将看到所有包含状态、大小、空闲等信息的磁盘，^{(all the disk with information such as status, size, free etc)}但您需要检查磁盘#在其 GPT 列中Disk # has a * (asterisk) 

注意：^(Note:)代替“磁盘#”将有数字，例如磁盘 1 或磁盘 0^{(Disk 0)}。

4.If the Disk # has a * (asterisk) in its GPT column则该磁盘具有 GPT 分区样式^{(disk has a GPT partition style)}。然而，如果Disk # doesn’t
have a * (asterisk) in its GPT column则该磁盘将具有MBR 分区样式。^{( MBR partition style.)}

推荐的：^{(Recommended:)}

• ^{(Add or Remove Words)}在Windows 10的拼写检查词典中^{(Spell Checking Dictionary)}添加或删除单词
• 将Microsoft 帐户链接^{(Link Microsoft Account)}到Windows 10 数字许可证^{(Digital License)}
• 在Windows 10中启用或禁用文件夹^(Folders)的区分大小写属性^{(Case Sensitive Attribute)}
• 如何在Windows 10中安装或卸载^{(Windows 10)}图形^(Graphics) 工具^(Tools)

就是这样，您已经成功学习了如何在 Windows 10 中检查磁盘是否使用 MBR 或 GPT 分区，^{(How to Check if a Disk Uses MBR or GPT Partition in Windows 10)}但如果您对本教程仍有任何疑问，请随时在评论部分提出。

3 Ways to Check if a Disk Uses MBR or GPT Partition in Windows 10

3 Ways to Check if a Disk Uses MBR or GPT Partition in Windows 10: Namely, there are two hard disk partition styles GPT (GUID Partition Table) and MBR (Master Boot Record) which can be used for a disk. Now, most of the Windows 10 users aren’t aware of which partition they are using and therefore, this tutorial will help them figure out whether they are using MBR or GPT Partition style. The modern version of Windows uses GPT partition which is required for booting Windows in UEFI mode.

Whereas older Windows operating system uses MBR which was required for booting Windows into BIOS mode. Both of the partition styles are just different ways of storing the partition table on a drive. Master Boot Record (MBR) is a special boot sector located at the beginning of a drive which contains information about the bootloader for the installed OS and drive’s logical partitions. MBR partition style can only work with disks which are up to 2TB in size and it only supports up to four primary partitions.

GUID Partition Table (GPT) is a new partition style replacing the old MBR and if your drive is GPT then every partition on your drive has a globally unique identifier or GUID – a random string so long that every GPT partition in the whole world has its own unique identifier. GPT supports up to 128 partition rather than the 4 primary partitions limited by MBR and GPT keeps a backup of the partition table at the end of the disk whereas MBR only store boot data at only one place.

Furthermore, GPT disk provides greater reliability due to replication and cyclical redundancy check (CRC) protection of the partition table. In short, GPT is the best disk partition style out there which supports all the latest features and gives you more room for working smoothly on your system. So without wasting any time let’s see How to Check if a Disk Uses MBR or GPT Partition in Windows 10 with the help of the below-listed tutorial.

3 Ways to Check if a Disk Uses MBR or GPT Partition in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Check if a Disk Uses MBR or GPT Partition in Device Manager

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Disk drives then right-click on the disk you want to check and select Properties.

3.Under Disk Properties switch to Volumes tab and click on Populate button at the bottom.

4.Now under “Partition style” see if the Partition style for this disk is GUID Partition Table (GPT) or Master Boot Record (MBR).

Method 2: Check if a Disk Uses MBR or GPT Partition in Disk Management

1.Press Windows Key + R then type diskmgmt.msc and hit Enter to open Disk Management.

2.Now right-click on the “Disk #” (instead of # there will be number e.g. Disk 1 or Disk 0) you want to check and select Properties.

3.Inside the Disk properties window switch to Volumes tab.

4.Next, under “Partiton style” see if the Partition style for this disk is GUID Partition Table (GPT) or Master Boot Record (MBR).

5.Once finished, you can close the Disk Management window.

This is How to Check if a Disk Uses MBR or GPT Partition in Windows 10, but if you still want to use another method than continue.

Method 3: Check if a Disk Uses MBR or GPT Partition in Command Prompt

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command one by one and hit Enter after each one:

diskpart
list disk

3.Now you will see all the disk with information such as status, size, free etc but you need to check if the Disk # has a * (asterisk) in its GPT column or not.

Note: Instead of “Disk #” there will be number e.g. Disk 1 or Disk 0.

4.If the Disk # has a * (asterisk) in its GPT column then this disk has a GPT partition style. Whereas, if the Disk # doesn’t
have a * (asterisk) in its GPT column then this disk will have an MBR partition style.

Recommended:

• Add or Remove Words in Spell Checking Dictionary in Windows 10
• Link Microsoft Account to Windows 10 Digital License
• Enable or Disable Case Sensitive Attribute for Folders in Windows 10
• How to Install or Uninstall Graphics Tools in Windows 10

That’s it you have successfully learned How to Check if a Disk Uses MBR or GPT Partition in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• 如何在 Windows 10 中将 GPT 磁盘转换为 MBR 磁盘

• 在 Windows 10 中将 MBR 转换为 GPT 磁盘而不会丢失数据

• 4 Ways至Windows 10中的Run Disk Error Checking

• 如何在Windows 10中删除Volume or Drive Partition

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• 6 Ways在Windows 10中切换User

• 2 Ways至Windows 10中的Map Network Drive

• 6 Ways至Windows 10中Access BIOS（Dell/Asus/ HP）

• 7 Ways在Windows 10中打开Elevated Windows PowerShell

• 修复或修复 Windows 10 中的主引导记录 (MBR)

• 4 Ways至Windows 10上的View Saved WiFi Passwords

• 3 Ways检查Windows 10是否已激活

• Windows 10上的Fix Steam Corrupt Disk Error

• 8 Ways在Windows 10中打开Windows Services Manager

• 5 Ways在Windows 10上关闭Touchpad

• 5 Ways至Windows 10 Fix High

• 4 Ways更新Windows 10中的Graphics Drivers

• Windows 10的Fix High CPU and Disk usage problem

• 3 Ways在Windows 10中杀死A Process

• 18 Ways优化Windows 10进行游戏