如何修复 Windows 10 自行开启： ^{(How To Fix Windows 10 Turns ON by itself: )}如果您最近升级到或更新了Windows 10，那么您可能会遇到一个奇怪的问题，即Windows 10会在奇怪的时间自行开启，并且在没有人靠近的情况下也会如此。现在没有特定的时间发生这种情况，但计算机似乎不会超过几个小时。好吧^(Well)，很多Windows 10用户提出的问题是如何在没有用户干预的情况下阻止Windows 10从关机或睡眠中唤醒。

我们的指南将详细讨论这个问题，每一步都会让您更接近解决问题。这些步骤有助于解决数千台 PC 上的问题，因此我希望这对您也有用。现在有很多事情可能导致这个问题，所以不要浪费任何时间，让我们看看如何在下面列出的指南的帮助下修复 Windows 10自行^{(Fix Windows 10)} 打开^(Turns)问题。

如何修复 Windows 10^{(Fix Windows 10)} 自行打开^(Turns)

确保 创建一个还原点^{(create a restore point)}，以防万一出现问题。

方法一：关闭快速启动^{(Method 1: Turn OFF Fast Startup)}

1.按Windows Key + R然后键入 control 并按Enter打开控制面板。^{(Control Panel.)}

2.点击硬件和声音，^{(Hardware and Sound)}然后点击电源选项^{(Power Options)}。

3.然后从左侧窗格中选择“选择电源按钮的功能。^{(Choose what the power buttons do.)}“

4.现在点击“更改当前不可用的设置。^{(Change settings that are currently unavailable.)}“

5.取消选中“开启快速启动^{(Turn on fast startup)}”并点击保存更改。

方法2：在启动和恢复下更改设置^{(Method 2: Change Settings under Startup and Recovery)}

1.按 Windows 键 + R 然后键入sysdm.cpl并按Enter打开系统^(System) 属性^(Properties)。

2.切换到高级选项卡^{(Advanced tab)}，然后单击启动和恢复^{( Startup and Recovery.)}下的设置。^(Settings)

3.在系统故障^{(System failure)}下，取消选中“自动重启”。^{(uncheck “Automatically restart.”)}

4.单击确定，然后单击应用^(Apply)，然后单击确定。

5.重新启动您的 PC 以保存更改并查看您是否能够修复 Windows 10 自行打开问题。^{(Fix Windows 10 Turns on by itself issue.)}

方法 3：禁用唤醒定时器^{(Method 3: Disable Wake Timers)}

1.按 Windows 键 + R 然后键入powercfg.cpl并按 Enter。

2.现在单击当前活动电源计划^{(currently active power plan.)}旁边的更改计划设置。^{(Change plan settings)}

3.下一步，单击更改高级电源设置。^{(Change advanced power settings.)}

4.向下滚动直到找到Sleep，展开它。

5.在睡眠下，您会发现“允许唤醒定时器”。^{(Allow wake timers.)}“

6.展开它并确保它具有以下配置：

使用电池：禁用^{(On Battery: Disable)}
插入：禁用^{(Plugged in: Disable)}

7.单击应用，然后单击确定。

8.重新启动您的 PC 以保存更改并查看您是否能够 修复 Windows 10 自行打开问题。^{(Fix Windows 10 Turns on by itself issue.)}

方法 4：解决问题^{(Method 4: Troubleshoot the Problem)}

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.在 cmd 中键入以下命令并按Enter：

powercfg –lastwake

powercfg –devicequery wake_armed

3.第一个命令“ powercfg –lastwake ”将告诉您唤醒计算机的最后一个设备，一旦您知道该设备，请按照该设备的下一个方法。

4.接下来，“ powercfg –devicequery wake_armed ”命令将列出能够唤醒计算机的设备。

5.从上面的查询中找到罪魁祸首设备，然后运行以下命令禁用它们：

powercfg -devicedisablewake “设备名称”^{(powercfg -devicedisablewake “device name”)}

注意：^(Note:) 将^(Replace)设备名称替换为步骤 4 中的实际设备名称。

6.重新启动您的 PC 以保存更改并查看您是否能够 修复 Windows 10 自行打开问题。^{(Fix Windows 10 Turns on by itself issue.)}

方法 5：唤醒您的 Wi-Fi 适配器^{(Method 5: Wake up your Wi-Fi Adapter)}

1.按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2.展开网络适配器^{( Network adapters)}，然后右键单击已安装的网络适配器并选择属性。^{(Properties.)}

3.切换到电源管理选项卡^{(Power Management Tab)}，确保取消选中^(uncheck)“允许计算机关闭此设备以节省电源”。^{(Allow the computer to turn off this device to save power.)}“

4.单击确定并关闭设备管理器^{(Device Manager)}。重新启动^(Reboot)您的 PC 以保存更改。

方法 6：运行电源疑难解答^{(Method 6: Run Power troubleshooter)}

1.在Windows 搜索^{(Windows Search)}中键入控制^(Control)，然后单击控制面板。^{(Control Panel.)}

2.现在在右上角的搜索^(Search)框中输入疑难解答^{(troubleshooting)} 或疑难解答，然后按Enter。

3.从搜索结果中单击故障排除。^{(click on Troubleshooting.)}

4.下一步，点击系统和安全。^{(System and Security.)}

5.从疑难解答^{(Troubleshoot)}屏幕中选择电源^(Power)并让疑难解答程序运行。

6.按照屏幕说明完成故障排除。

7.重新启动您的 PC 以保存更改并查看您是否能够 修复 Windows 10 自行打开问题。^{(Fix Windows 10 Turns on by itself issue.)}

方法 7：将电源计划重置为默认值^{(Method 7: Reset Power Plans to Default)}

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.在 cmd 中键入以下命令并按Enter：

powercfg –restoredefaultschemes

3.退出 cmd 并重新启动您的 PC 以保存更改。

方法 8：禁用系统维护以唤醒计算机^{(Method 8: Disable System Maintenance to wake up the computer)}

1.在Windows 搜索^{(Windows Search)}中键入控制^(Control)，然后单击控制面板。^{(Control Panel.)}

2.现在点击系统和安全。^{(System and Security.)}

3.下一步，点击安全和维护。^{(Security and Maintenance.)}

4.展开维护并在自动维护^{(Automatic Maintenance)}下单击“更改维护设置。^{(Change maintenance settings.)}“

5.取消勾选“允许定期维护在预定时间唤醒我的电脑^{(Allow scheduled maintenance to wake up my computer at the scheduled time)}”。

6.单击确定保存更改并重新启动您的 PC。

方法 9：禁用重启计划任务^{(Method 9: Disable Reboot Scheduled Task)}

1.按 Windows 键 + R 然后键入Taskschd.msc并按Enter打开任务计划程序^{(Task Scheduler)}。

2.现在从左侧菜单导航到以下路径：

Task Scheduler Library > Microsoft > Windows > UpdateOrchestrator

3.双击重新启动^(Reboot)打开其属性^(Properties)，然后切换到条件选项卡。^{(Conditions tab.)}

4.取消选中^(Uncheck)电源下的“唤醒计算机运行此任务”。^{(Wake the computer to run this task)}

5.单击确定保存更改。

6.现在右键单击重新启动^(Reboot)并选择禁用。^(Disable.)

7.您需要编辑权限才能保留这些设置，否则一旦您关闭任务计划程序^{(Task Scheduler)}，Windows将再次更改设置。

8.导航到以下路径：

C:\Windows\System32\Tasks\Microsoft\Windows\UpdateOrchestrator

9.右键单击重新启动^(Reboot)文件并选择属性。^{(Properties.)}

10.取得文件的所有权，按Windows Key + X，然后单击命令提示符^{(Command Prompt)}（管理员）。

11.在 cmd 中键入以下命令并按Enter：

takeown /f C:\Windows\System32\Tasks\Microsoft\Windows\UpdateOrchestrator\reboot

cacls C:\Windows\System32\Tasks\Microsoft\Windows\UpdateOrchestrator\reboot /G Your_Username:F

12.现在确保安全^(Security)设置配置如下：

13.单击应用，然后单击确定。

14.重新启动您的 PC 以保存更改并查看您是否能够 修复 Windows 10 自行打开问题。^{(Fix Windows 10 Turns on by itself issue.)}

方法 10：Windows 更新电源管理^{(Method 10: Windows Update Power Management)}

注意：^(Note:)这不适用于Windows 家庭版^{(Windows Home Edition)}用户。

1.按 Windows 键 + R 然后键入gpedit.msc并按 Enter。

2.现在导航到以下路径：

Computer Configuration > Administrative Templates > Windows Components > Windows Updates

3.现在从右侧窗口双击“启用Windows更新电源管理以自动唤醒系统以安装预定更新^{(Enabling Windows Update Power Management to automatically wake up the system to install scheduled updates)}”。

4.选中已禁用^(Disabled)，然后单击应用，然后单击确定。

5.重启你的电脑。

受到推崇的：^{(Recommended:)}

• 如何在 Windows 10 中显示文件扩展名^{(How to Show File Extensions in Windows 10)}
• 如何修复计算机自动关闭^{(How to Fix Computer turns off automatically)}
• 修复操作中心在 Windows 10 中不起作用^{(Fix Action Center Not Working in Windows 10)}
• 如何在 Windows 10 中禁用任务视图按钮^{(How to disable the Task View Button in Windows 10)}

就是这样，您已成功修复 Windows 10 自行打开问题^{(Fix Windows 10 Turns on by itself issue)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提问。

How To Fix Windows 10 Turns ON by itself

How To Fix Windows 10 Turns ON by itself: If you have recently upgraded to or updated Windows 10 then chances are you may be facing a strange issue where Windows 10 turns ON by itself at odd times and that too when no one is near it. Now there is no particular time when this happens, but it seems that the computer won’t stay off for more than few hours. Well, the question a lot of Windows 10 users are asking is how to stop Windows 10 waking up from the shutdown or sleep without user intervention.

Our guide will discuss this problem in detail and each & every step will bring you closer to fixing the issue. These steps have been beneficial in fixing the issue on thousands of PC, so I hope this will work for you as well. Now there are a number of things which can cause this issue, so without wasting any time let’s see how to Fix Windows 10 Turns on by itself problem with the help of the below-listed guide.

How To Fix Windows 10 Turns on by itself

Make sure to create a restore point, just in case something goes wrong.

Method 1: Turn OFF Fast Startup

1.Press Windows Key + R then type control and hit Enter to open Control Panel.

2.Click on Hardware and Sound then click on Power Options.

3.Then from the left window pane select “Choose what the power buttons do.“

4.Now click on “Change settings that are currently unavailable.“

5.Uncheck “Turn on fast startup” and click on Save changes.

Method 2: Change Settings under Startup and Recovery

1.Press Windows Key + R then type sysdm.cpl and hit Enter to open System Properties.

2.Switch to the Advanced tab and click on Settings under Startup and Recovery.

3.Under System failure, uncheck “Automatically restart.”

4.Click OK, then click Apply followed OK.

5.Reboot your PC to save changes and see if you’re able to Fix Windows 10 Turns on by itself issue.

Method 3: Disable Wake Timers

1.Press Windows Key + R then type powercfg.cpl and hit Enter.

2.Now click on Change plan settings next to your currently active power plan.

3.Next, click Change advanced power settings.

4.Scroll down till you find Sleep, expand it.

5.Under Sleep, you will find “Allow wake timers.“

6.Expand it and make sure it has the following configuration:

On Battery: Disable
Plugged in: Disable

7.Click Apply followed by OK.

8.Reboot your PC to save changes and see if you’re able to Fix Windows 10 Turns on by itself issue.

Method 4: Troubleshoot the Problem

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter:

powercfg –lastwake

powercfg –devicequery wake_armed

3.The first command “powercfg –lastwake” will tell you the last device which wakes your computer, once you know the device follow the next method for that device.

4.Next, “powercfg –devicequery wake_armed” command will list the devices that are able to wake up the computer.

5.Find the culprit device from above query then run the following command to disable them:

powercfg -devicedisablewake “device name”

Note: Replace the device name with the actual device name from step 4.

6.Reboot your PC to save changes and see if you’re able to Fix Windows 10 Turns on by itself issue.

Method 5: Wake up your Wi-Fi Adapter

1.Press Windows Key + R then type devmgmt.msc and hit Enter.

2.Expand Network adapters then right-click on your installed network adapter and select Properties.

3.Switch to Power Management Tab and make sure to uncheck “Allow the computer to turn off this device to save power.“

4.Click Ok and close the Device Manager. Reboot your PC to save changes.

Method 6: Run Power troubleshooter

1.Type Control in Windows Search then click on Control Panel.

2.Now type troubleshooting or troubleshooter in the Search box in the top right corner and hit Enter.

3.From the search result click on Troubleshooting.

4.Next, click on System and Security.

5.From the Troubleshoot problems screen select Power and let the troubleshooter run.

6.Follow-on screen instructions to complete troubleshooting.

7.Reboot your PC to save changes and see if you’re able to Fix Windows 10 Turns on by itself issue.

Method 7: Reset Power Plans to Default

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter:

powercfg –restoredefaultschemes

3.Exit cmd and reboot your PC to save changes.

Method 8: Disable System Maintenance to wake up the computer

1.Type Control in Windows Search then click on Control Panel.

2.Now click on System and Security.

3.Next, click on Security and Maintenance.

4.Expand Maintenance and under Automatic Maintenance click on “Change maintenance settings.“

5.Uncheck “Allow scheduled maintenance to wake up my computer at the scheduled time“.

6.Click OK to save changes and reboot your PC.

Method 9: Disable Reboot Scheduled Task

1.Press Windows Key + R then type Taskschd.msc and hit Enter to open Task Scheduler.

2.Now from the left-hand menu navigate to the following path:

Task Scheduler Library > Microsoft > Windows > UpdateOrchestrator

3.Double click on Reboot to open its Properties then switch to Conditions tab.

4.Uncheck “Wake the computer to run this task” under Power.

5.Click OK to save changes.

6.Now right-click on Reboot and select Disable.

7.You need to edit the permission in order for these settings to stay or else as soon as you close the Task Scheduler, Windows will again change the settings.

8.Navigate to the following path:

C:\Windows\System32\Tasks\Microsoft\Windows\UpdateOrchestrator

9.Right-click on Reboot file and select Properties.

10.Take ownership of the file, press Windows Key + X then click on Command Prompt (Admin).

11.Type the following command into cmd and hit Enter:

takeown /f C:\Windows\System32\Tasks\Microsoft\Windows\UpdateOrchestrator\reboot

cacls C:\Windows\System32\Tasks\Microsoft\Windows\UpdateOrchestrator\reboot /G Your_Username:F

12.Now make sure the Security settings are configured as follows:

13.Click Apply followed by OK.

14.Reboot your PC to save changes and see if you’re able to Fix Windows 10 Turns on by itself issue.

Method 10: Windows Update Power Management

Note: This will not work for Windows Home Edition users.

1.Press Windows Key + R then type gpedit.msc and hit Enter.

2.Now navigate to the following path:

Computer Configuration > Administrative Templates > Windows Components > Windows Updates

3.Now from the right-hand window double click on “Enabling Windows Update Power Management to automatically wake up the system to install scheduled updates“.

4.Checkmark Disabled then click Apply followed by OK.

5.Reboot your PC.

Recommended:

• How to Show File Extensions in Windows 10
• How to Fix Computer turns off automatically
• Fix Action Center Not Working in Windows 10
• How to disable the Task View Button in Windows 10

That’s it you have successfully Fix Windows 10 Turns on by itself issue but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• 如何Fix Windows 10 Mic不工作Issue？

• Fix Windows 10无法识别iPhone

• 如何在更新后速度速度速度速度

• Fix Windows 10不使用完整RAM

• Fix Windows 10 Start Menu Issues

• Windows 10中的Fix Microsoft Compatibility Telemetry High Disk Usage

• Windows 10中Fix Class不是Registered error

• Fix No Internet Connection更新到Windows 10创建者更新后

• 修复 Windows 10 睡眠模式不起作用

• Fix Calculator不在Windows 10工作

• Fix Spotify未在Windows 10上开放

• Windows 10上的Fix Cursor Blinking Issue

• 如何在Windows 10响应Fix Printer

• Fix Windows 10 Start Button不起作用

• 升级到Windows 10后未检测到Fix CD/DVD drive

• 如何修复 Windows 10 触摸屏不工作

• Fix HDMI No Sound在Windows 10连接到电视时

• Windows 10上的Fix Device不是Migrated Error

• Windows 10上的Fix Generic PnP Monitor Problem

• 如何修复 Windows 10 无法更新