修复 Windows 10 随机死机: (Fix Windows 10 Freezes Randomly: )如果您最近从早期版本的Microsft 操作系统升级到(Microsft OS)Windows 10 ,那么您可能会遇到Windows 10随机死机,而 PC 上没有任何负载。这会经常发生,您将没有其他选择来强制关闭您的系统。出现此问题的原因是硬件和驱动程序之间的不兼容,因为它们被设计为在您的早期版本的Windows上运行,并且在升级到Windows 10后,驱动程序变得不兼容。
冻结或挂起问题主要是因为显卡驱动程序与Windows 10不兼容。好吧,还有其他问题可能导致此错误,并且不仅限于显卡驱动程序。至于为什么会看到此错误,这主要取决于用户的系统配置。有时,第 3 方软件也可能导致此问题,因为它们与Windows 10不兼容。无论如何(Anyway),不要浪费任何时间,让我们看看如何使用下面列出的故障排除指南实际修复 Windows 10(Fix Windows 10) 随机冻结问题。(Freezes Randomly)
注意:确保(Make)断开所有USB扩展或连接的设备与您的 PC 的连接,并再次验证问题是否已解决。
[已解决] Windows 10随机冻结(Freezes Randomly)
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法一:更新显卡驱动(Method 1: Update Graphics Card Drivers)
1.按 Windows 键 + R 然后输入“ devmgmt.msc ”(不带引号)并按回车键打开设备管理器(Device Manager)。
2.下一步,展开显示适配器( Display adapters)并右键单击您的Nvidia显卡(Nvidia Graphic Card)并选择“更新驱动程序软件。(Update Driver Software.)“
3.选择“自动搜索更新的驱动软件(Search automatically for updated driver software)”,让它完成这个过程。
4.如果上述步骤能够解决您的问题,那么很好,如果没有,请继续。
5.再次选择“更新驱动程序软件(Update Driver Software)”,但这次在下一个屏幕上选择“浏览我的计算机以获取驱动程序软件。(Browse my computer for driver software.)“
6.现在选择“让我从计算机上的设备驱动程序列表中(Let me pick from a list of device drivers on my computer)选择” 。
7.最后,从列表中为您的Nvidia 显卡(Nvidia Graphic Card)选择兼容的驱动程序,然后单击下一步。
9.让上述过程完成并重新启动PC以保存更改。更新显卡(Graphic)后,您可能能够修复 Windows 10 随机冻结问题, (Fix Windows 10 Freezes Randomly Issue, )如果没有,则继续。
10.首先,你应该知道你有什么图形硬件,即你有什么Nvidia显卡,如果你不知道也不要担心,因为它很容易找到。
11.按Windows Key + R并在对话框中键入“dxdiag”并回车。
12.搜索显示选项卡后(将有两个显示选项卡,一个用于集成显卡,另一个是Nvidia的)单击显示选项卡并找到您的显卡。
13.现在进入Nvidia驱动下载网站(download website),输入我们刚刚找到的产品详细信息。
14.输入信息后搜索您的驱动程序,点击同意(Agree)并下载驱动程序。
15.下载成功后,安装驱动,就成功更新了Nvidia驱动。
方法 2:运行 Netsh Winsock 重置命令(Method 2: Run Netsh Winsock Reset Command)
1.按Windows Key + X然后选择命令提示符(管理员)。(Command Prompt (Admin).)
2.在cmd中输入(Enter)以下命令并在每个命令后按Enter:
netsh winsock reset
netsh int ip reset reset.log hit
3.您将收到一条消息“成功重置Winsock目录。(Successfully reset the Winsock Catalog.)“
4.重新启动您的PC,这将修复Windows 10随机冻结。(Fix Windows 10 Freezes Randomly.)
方法 3:运行 Windows 内存诊断(Method 3: Run Windows Memory Diagnostic)
1.在Windows搜索栏中键入内存,然后选择“ Windows 内存诊断”。(Windows Memory Diagnostic.)“
2.在显示的选项集中选择“立即重新启动并检查问题。(Restart now and check for problems.)“
3.之后,Windows将重新启动以检查可能的 RAM 错误,并希望显示Windows 10 随机冻结的可能原因。( why Windows 10 Freezes Randomly.)
4.重新启动您的 PC 以保存更改。
Method 4: Run Memtest86+
现在运行第 3 方软件Memtest86+,但它消除了所有可能的内存错误异常,因为它在Windows环境之外运行。
注意:(Note:)开始之前,请确保您可以访问另一台计算机,因为您需要将软件下载并刻录到光盘或USB闪存驱动器。运行Memtest(Memtest)时最好让计算机过夜,因为这肯定需要一些时间。
1.将USB闪存驱动器连接到您的系统。
2.下载并安装Windows Memtest86 USB Key 自动安装程序(Windows Memtest86 Auto-installer for USB Key)。
3.右键单击刚刚下载的图像文件,然后选择“在此处提取(Extract here)”选项。
4.解压后,打开文件夹并运行Memtest86+ USB Installer。
5.选择您插入的USB驱动器来刻录MemTest86软件(这将格式化您的USB驱动器)。
6.完成上述过程后,将USB插入(USB)Windows 10 未使用完整 RAM(Windows 10 not using full RAM.)的 PC 。
7.重新启动您的 PC 并确保选择从USB闪存驱动器启动。
8.Memtest86 将开始测试系统中的内存损坏。
9.如果你通过了所有的测试,那么你可以确定你的记忆工作正常。
10.如果某些步骤不成功,那么Memtest86会发现内存损坏,这意味着Windows 10(Windows 10 Freezes Randomly) 由于内存损坏/损坏而随机冻结。
11.为了 修复 Windows 10 随机冻结问题( Fix Windows 10 Freezes Randomly Issue),如果发现坏内存扇区,您需要更换RAM 。
方法 5:执行干净启动(Method 5: Perform a Clean Boot)
有时,第 3 方软件可能会与系统(System)发生冲突,因此系统(System)可能无法完全关闭。为了修复 Windows 10 随机冻结问题(Fix Windows 10 Freezes Randomly Issue),您需要在 PC 中执行干净启动(perform a clean boot)并逐步诊断问题。
方法6:增加虚拟内存(Method 6: Increase Virtual Memory)
1.按Windows Key + R运行(Run)对话框中键入 sysdm.cpl,然后单击确定打开系统属性(System Properties)。
2.在系统属性(System Properties)窗口中,切换到高级选项卡(Advanced tab),然后在性能(Performance)下,单击设置(Settings)选项。
3.接下来,在“性能选项(Performance Options)”窗口中,切换到“高级”选项卡(Advanced tab ),然后单击“虚拟内存”下的“更改”。(Change)
4.最后,在如下所示的虚拟内存(Virtual memory)窗口中,取消选中“自动管理所有驱动器的分页文件大小(Automatically manage paging file size for all drive)”选项。然后在每个类型标题的分页文件大小和自定义(Custom)大小选项下突出显示您的系统驱动器,设置合适的值对于字段:初始大小 (MB) 和最大(Maximum)大小 (MB)。强烈建议避免在此处选择无分页文件选项(It is highly recommended to avoid selecting No paging file option here)。
5.选择显示自定义大小(Custom size)的单选按钮 并将初始大小设置为1500 到 3000(1500 to 3000),最大设置为至少5000(这两个都取决于您的硬盘大小)。
6.现在,如果您增加了大小,则不需要重新启动。但是,如果您减小了页面文件的大小,则必须重新启动才能使更改生效。
方法 7:禁用快速启动(Method 7: Disable Fast Startup)
1.按 Windows 键 + R 然后输入“ powercfg.cpl ”并按回车键打开电源选项(Power Options)。
2.单击左上栏中的选择电源按钮的功能。(Choose what the power buttons do)
3.下一步,单击更改(Change)当前不可用的设置。
4.取消选中关机设置下的启用快速启动。(Uncheck Turn on Fast startup)
5.现在单击保存更改(Save Changes)并重新启动(Restart)您的 PC。
方法 8:运行 SFC 和 CHDKSK(Method 8: Run SFC and CHDKSK)
1.按Windows Key + X然后单击命令提示符(管理员)。( Command Prompt(Admin).)
2.现在在cmd中输入以下内容并回车:
Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)
3.等待上述过程完成,完成后重新启动您的电脑。
4.接下来,从这里运行 CHKDSK Fix File System Errors with Check Disk Utility(CHKDSK)。
5.让上述过程完成并再次重新启动您的 PC 以保存更改。
方法 9:关闭定位服务(Method 9: Turn Off Location Services)
1.按Windows Key + I 打开设置(Settings),然后单击隐私。(Privacy.)
2.现在从左侧菜单中选择位置(Location),然后 禁用或关闭位置服务。( disable or turn off Location Service.)
3.重新启动您的 PC 以保存更改,这将 修复 Windows 10 随机冻结问题。( Fix Windows 10 Freezes Randomly Issue.)
方法 10:禁用硬盘休眠(Method 10: Disable Hard Disk Hibernation)
1.右键单击系统托盘上的电源图标(Power icon),然后选择电源选项。(Power Options.)
2.单击您选择的电源计划旁边的更改计划设置。(Change plan settings)
3.现在点击更改高级电源设置。(Change advanced power settings.)
4.Expand Hard disk then expand之后关闭硬盘。( Turn off hard disk after.)
5.现在编辑电池和插入的设置。
6.为上述两个设置键入 Never(Type Never)并按Enter 。
7.重新启动您的 PC 以保存更改。
方法 11:禁用链路状态电源管理(Method 11: Disable Link State Power Management)
1.按 Windows 键 + R 然后输入“ powercfg.cpl ”并按回车键打开电源选项(Power Options)。
2.单击您选择的电源计划旁边的更改计划设置。(Change plan settings)
3.现在点击更改高级电源设置。(Change advanced power settings.)
4.展开 PCI Express 然后展开 Link State Power Management。
5.从下拉菜单中选择关闭(OFF)电池和插入电源设置。
6.重新启动您的 PC 以保存更改并查看您是否能够 修复 Windows 10(Fix Windows 10) 随机冻结(Freezes Randomly)。
方法 12:禁用 Shell 扩展(Method 12: Disable Shell Extension)
当您在Windows中安装程序或应用程序时,它会在右键单击上下文菜单中添加一个项目。这些项目称为外壳扩展,现在如果您添加可能与Windows冲突的内容,这肯定会导致Windows 10 随机冻结(Freezes Randomly)问题。由于Shell扩展是Windows Explorer的一部分,因此任何损坏的程序都可能很容易导致此问题。
1.现在要检查哪些程序导致崩溃,您需要下载名为
ShellExView 的第 3 方软件。(ShellExView.)
2.双击zip文件中的应用程序ShellExView.exe运行它。(ShellExView.exe)等待(Wait)几秒钟,因为它第一次启动时需要一些时间来收集有关 shell 扩展的信息。
3.现在单击选项,然后单击隐藏所有 Microsoft 扩展。(Hide All Microsoft Extensions.)
4.现在按 Ctrl + A 将它们全部选中( select them all),然后按左上角的红色按钮。(red button)
5.如果要求确认,请选择是。( select Yes.)
6.如果问题已解决,则其中一个外壳扩展存在问题,但要找出您需要通过选择它们并按下右上角的绿色按钮将它们一一打开。如果在启用特定外壳扩展后 Windows 10随机冻结(Freezes Randomly),那么您需要禁用该特定扩展,或者如果您可以将其从系统中删除则更好。
方法 13:运行 DISM((Method 13: Run DISM ()部署映像服务和管理)(Deployment Image Servicing and Management))
1.按Windows Key + X并选择命令提示符(Command Prompt)(管理员(Admin))。
2.在cmd中输入以下命令并在每个命令后按回车:
a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth
3.让DISM命令运行并等待它完成。
4. 如果上述命令不起作用,请尝试以下操作:
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
注意:(Note:) 将(Replace)C:RepairSourceWindows 替换为修复源的位置(Windows 安装(Windows Installation)或恢复光盘(Recovery Disc))。
5.重新启动您的 PC 以保存更改。
方法 14: (Method 14: )Update BIOS (Basic Input/Output System)
执行BIOS更新是一项关键任务,如果出现问题,可能会严重损坏您的系统,因此建议专家监督。
1.第一步是识别您的BIOS版本,按 Windows Key + R然后输入“ msinfo32 ”(不带引号)并按回车键打开系统信息(System Information)。
2. 一旦系统信息( System Information)窗口打开,找到BIOS Version/Date,然后记下制造商和BIOS版本。
3.接下来,访问您的制造商网站,例如在我的情况下是戴尔(Dell),所以我将访问戴尔网站(Dell website),然后输入我的计算机序列号或单击自动检测选项。
4.现在从显示的驱动程序列表中,我将单击BIOS并下载推荐的更新。
注意:更新(Note:)BIOS时请勿关闭计算机或断开电源,否则可能会损坏计算机。在更新期间,您的计算机将重新启动,您将短暂看到黑屏。
5.下载文件后,只需双击exe文件即可运行它。
6.最后,您已经更新了BIOS,这也可能会修复 Windows 10 随机冻结问题。( Fix Windows 10 Freezes Randomly Issue.)
方法 15:运行 CCleaner 和 Malwarebytes(Method 15: Run CCleaner and Malwarebytes)
1.下载并安装 CCleaner & Malwarebytes。
2.运行 Malwarebytes(Run Malwarebytes)(Run Malwarebytes) 并让它扫描您的系统以查找有害文件。
3.如果发现恶意软件,它将自动删除它们。
4.现在运行 CCleaner ,在“Cleaner”部分的“ Windows ”选项卡下,我们建议检查以下要清理的选项:
5.一旦您确定检查了正确的点,只需单击 Run Cleaner, 然后让 CCleaner 运行。
6.要清理您的系统,请进一步选择注册表(Registry)选项卡并确保选中以下内容:
7.选择Scan for Issue并允许CCleaner扫描,然后单击 Fix Selected Issues。
8.当CCleaner 询问“您要备份对注册表的更改吗?(Do you want backup changes to the registry?)” 选择是。
9.备份完成后,选择Fix All Selected Issues。
10.重新启动您的 PC 以保存更改,这将 修复 Windows 10 随机冻结问题(Fix Windows 10 Freezes Randomly Issue),如果没有,则继续下一个方法。
方法 16:禁用您的专用显卡(Method 16: Disable Your Dedicated Graphic Card)
1.按 Windows 键 + R 然后输入“ devmgmt.msc ”(不带引号)并按回车键打开设备管理器(Device Manager)。
2.下一步,展开显示适配器( Display adapters)并右键单击您的Nvidia 显卡(Nvidia Graphic Card)并选择禁用。(Disable.)
3.重新启动您的 PC 以保存更改。
方法 17:更新您的网络驱动程序(Method 17: Update your Network drivers)
1.按Windows键+R,在运行对话框中输入“ devmgmt.msc ”打开(devmgmt.msc)设备管理器。(device manager.)
2.展开网络适配器(Network adapters),然后右键单击您的Wi-Fi 控制器 ( Wi-Fi controller )(例如Broadcom或Intel)并选择更新驱动程序软件。(Update Driver Software.)
3.在更新驱动程序软件窗口(Update Driver Software Windows)中,选择“浏览我的电脑以查找驱动程序软件。(Browse my computer for driver software.)“
4.现在选择“让我从计算机上的设备驱动程序列表中选择。(Let me pick from a list of device drivers on my computer.)“
5.尝试从列出的版本更新驱动程序。(update drivers from the listed versions.)
6.如果以上方法不行,去厂家网站(manufacturers website)更新驱动:https://downloadcenter.intel.com/
7.从制造商的网站安装最新的驱动程序并重新启动您的 PC。
通过重新安装网络适配器,您可以 修复 Windows 10 随机冻结问题。(Fix Windows 10 Freezes Randomly Issue.)
方法 18:修复安装 Windows 10(Method 18: Repair install Windows 10)
这种方法是最后的手段,因为如果没有任何效果,那么这种方法肯定会修复您 PC 的所有问题,并将修复 Windows 10(Fix Windows 10) 随机冻结问题(Freezes Randomly Issue)。修复安装(Repair Install)仅使用就地升级来修复系统问题,而不会删除系统上存在的用户数据。因此,请按照本文查看如何轻松修复安装 Windows 10。(How to Repair Install Windows 10 Easily.)
为你推荐:(Recommended for you:)
就是这样,您已成功[解决] Windows 10 随机冻结([SOLVED] Windows 10 Freezes Randomly) ,但如果您对这篇文章仍有任何疑问,请随时在评论部分提问。
[SOLVED] Windows 10 Freezes Randomly
Fix Windows 10 Freezes Randomly: If you have recently upgraded to Windows 10 from an earlier version of the Microsft OS then it might be possible that you may experience your Windows 10 freezes randomly without any load on the PC. This will happen frequently and you will have no other option to force shutdown your system. The issue occurs because of the incompatibility between hardware and drivers, as they were designed to work on your earlier version of Windows and after upgrading to Windows 10 the drivers become incompatible.
The freeze or hang issue mostly occurs because of the graphic card drivers being incompatible with Windows 10. Well, there are other issues which can cause this error and is not limited to graphic card drivers. It mostly depends on users system configuration as to why you see this error. Sometimes 3rd party software might also cause this issue as they are not being compatible with Windows 10. Anyway, without wasting any time let’s see how to actually Fix Windows 10 Freezes Randomly issue with the below-listed troubleshooting guide.
Note: Make sure to disconnect all USB extension or connected devices to your PC and again verify if the issue is resolved or not.
[SOLVED] Windows 10 Freezes Randomly
Make sure to create a restore point just in case something goes wrong.
Method 1: Update Graphics Card Drivers
1.Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.
2.Next, expand Display adapters and right-click on your Nvidia Graphic Card and select “Update Driver Software.“
3.Select “Search automatically for updated driver software” and let it finish the process.
4.If the above step was able to fix your problem then very good, if not then continue.
5.Again select “Update Driver Software” but this time on the next screen select “Browse my computer for driver software.“
6.Now select “Let me pick from a list of device drivers on my computer.”
7.Finally, select the compatible driver from the list for your Nvidia Graphic Card and click Next.
9.Let the above process finish and restart your PC to save changes. After updating Graphic card you may be able to Fix Windows 10 Freezes Randomly Issue, if not then continue.
10.First of all, you should know what graphics hardware you have i.e. which Nvidia graphic card you have, don’t worry if you don’t know about it as it can be easily find.
11.Press Windows Key + R and in the dialog box type “dxdiag” and hit enter.
12.After that search for the display tab (there will be two display tabs one for the integrated graphic card and another one will be of Nvidia’s) click on the display tab and find out your graphic card.
13.Now go to the Nvidia driver download website and enter the product details which we just find out.
14.Search your drivers after inputting the information, click Agree and download the drivers.
15.After successful download, install the driver and you have successfully updated your Nvidia drivers.
Method 2: Run Netsh Winsock Reset Command
1.Press Windows Key + X then select Command Prompt (Admin).
2.Type the following command into cmd and hit Enter after each one:
netsh winsock reset
netsh int ip reset reset.log hit
3.You will get a message “Successfully reset the Winsock Catalog.“
4.Reboot your PC and this will Fix Windows 10 Freezes Randomly.
Method 3: Run Windows Memory Diagnostic
1.Type memory in the Windows search bar and select “Windows Memory Diagnostic.“
2.In the set of options displayed select “Restart now and check for problems.“
3.After which Windows will restart to check for possible RAM errors and will hopefully display the possible reasons as to why Windows 10 Freezes Randomly.
4.Reboot your PC to save changes.
Method 4: Run Memtest86+
Now run the Memtest86+ which is a 3rd party software but it eliminates all the possible exceptions of memory errors as it runs outside of the Windows environment.
Note: Before starting, make sure you have access to another computer as you will need to download and burn the software to the disc or USB flash drive. It’s best to leave the computer overnight when running Memtest as it sure likely to takes some time.
1.Connect a USB flash drive to your system.
2.Download and install Windows Memtest86 Auto-installer for USB Key.
3.Right-click on the image file which you just downloaded and select “Extract here” option.
4.Once extracted, open the folder and run the Memtest86+ USB Installer.
5.Choose your plugged in USB drive to burn the MemTest86 software (This will format your USB drive).
6.Once the above process is finished, insert the USB to the PC in which Windows 10 not using full RAM.
7.Restart your PC and make sure that boot from the USB flash drive is selected.
8.Memtest86 will begin testing for memory corruption in your system.
9.If you have passed all the test then you can be sure that your memory is working correctly.
10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means Windows 10 Freezes Randomly because of bad/corrupt memory.
11.In order to Fix Windows 10 Freezes Randomly Issue, you will need to replace your RAM if bad memory sectors are found.
Method 5: Perform a Clean Boot
Sometimes 3rd party software can conflict with System and therefore the System might not shut down completely. In order Fix Windows 10 Freezes Randomly Issue, you need to perform a clean boot in your PC and diagnose the issue step by step.
Method 6: Increase Virtual Memory
1.Press Windows Key + R and type sysdm.cpl in Run dialog box and click OK to open System Properties.
2.In the System Properties window, switch to the Advanced tab and under Performance, click on Settings option.
3.Next, in the Performance Options window, switch to the Advanced tab and click on Change under Virtual memory.
4.Finally, in the Virtual memory window shown below, uncheck the “Automatically manage paging file size for all drive” option.Then highlight your system drive under Paging file size for each type heading and for the Custom size option, set the suitable values for fields: Initial size (MB) and Maximum size (MB). It is highly recommended to avoid selecting No paging file option here.
5.Select the radio button which says Custom size and set the initial size to 1500 to 3000 and maximum to at least 5000 (Both of these depends on the size of your hard disk).
6.Now if you’ve increased the size, a reboot is not mandatory. But if you’ve decreased the size of the paging file, you must have to reboot to make changes effective.
Method 7: Disable Fast Startup
1.Press Windows Key + R then type “powercfg.cpl” and hit enter to open Power Options.
2.Click on Choose what the power buttons do in the top-left column.
3.Next, click on Change settings that are currently unavailable.
4.Uncheck Turn on Fast startup under Shutdown settings.
5.Now click Save Changes and Restart your PC.
Method 8: Run SFC and CHDKSK
1.Press Windows Key + X then click on Command Prompt(Admin).
2.Now type the following in the cmd and hit enter:
Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)
3.Wait for the above process to finish and once done restart your PC.
4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).
5.Let the above process complete and again reboot your PC to save changes.
Method 9: Turn Off Location Services
1.Press Windows Key + I to open Settings and then click on Privacy.
2.Now from the left-hand menu select Location and then disable or turn off Location Service.
3.Reboot your PC to save changes and this would Fix Windows 10 Freezes Randomly Issue.
Method 10: Disable Hard Disk Hibernation
1.Right-click on Power icon on system tray and select Power Options.
2.Click Change plan settings next to your chosen Power plan.
3.Now click Change advanced power settings.
4.Expand Hard disk then expand Turn off hard disk after.
5.Now edit the setting for On battery and plugged in.
6.Type Never and hit Enter for both of the above settings.
7.Reboot your PC to save changes.
Method 11: Disable Link State Power Management
1.Press Windows Key + R then type “powercfg.cpl” and hit enter to open Power Options.
2.Click Change plan settings next to your chosen Power plan.
3.Now click Change advanced power settings.
4.Expand PCI Express then expand Link State Power Management.
5.From the drop-down select OFF for both On battery and plugged in power settings.
6.Reboot your PC to save changes and see if you’re able to Fix Windows 10 Freezes Randomly.
Method 12: Disable Shell Extension
When you install a program or application in Windows, it adds an item in the right-click context menu. The items are called shell extensions, now if you add something which might conflict with the Windows this could certainly cause the Windows 10 Freezes Randomly issue. As Shell extension is part of Windows Explorer hence any corrupt program could easily cause this problem.
1.Now to check which of these programs are causing the crash you need to download a 3rd party software called
ShellExView.
2.Double click the application ShellExView.exe in the zip file to run it. Wait for few seconds as when it launches for the first time it takes some time to collect information about shell extensions.
3.Now click Options then click on Hide All Microsoft Extensions.
4.Now Press Ctrl + A to select them all and press the red button in the top-left corner.
5.If it asks for confirmation select Yes.
6.If the issue is resolved then there is a problem with one of the shell extensions but to find out which one you need to turn them ON one by one by selecting them and pressing the green button on the top right. If after enabling a particular shell extension Windows 10 Freezes Randomly then you need to disable that particular extension or better if you can remove it from your system.
Method 13: Run DISM (Deployment Image Servicing and Management)
1.Press Windows Key + X and select Command Prompt(Admin).
2.Type the following command in cmd and hit enter after each one:
a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth
3.Let the DISM command run and wait for it to finish.
4. If the above command doesn’t work then try on the below:
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).
5.Reboot your PC to save changes.
Method 14: Update BIOS (Basic Input/Output System)
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, an expert supervision is recommended.
1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.
2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.
3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.
4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.
Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.
5.Once the file is downloaded, just double click on the Exe file to run it.
6.Finally, you have updated your BIOS and this may also Fix Windows 10 Freezes Randomly Issue.
Method 15: Run CCleaner and Malwarebytes
1.Download and install CCleaner & Malwarebytes.
2.Run Malwarebytes and let it scan your system for harmful files.
3.If malware is found it will automatically remove them.
4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:
5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.
6.To clean your system further select the Registry tab and ensure the following are checked:
7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.
8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.
9.Once your backup has completed, select Fix All Selected Issues.
10.Restart your PC to save changes and this would Fix Windows 10 Freezes Randomly Issue, if not then continue with the next method.
Method 16: Disable Your Dedicated Graphic Card
1.Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.
2.Next, expand Display adapters and right-click on your Nvidia Graphic Card and select Disable.
3.Reboot your PC to save changes.
Method 17: Update your Network drivers
1.Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open device manager.
2.Expand Network adapters, then right-click on your Wi-Fi controller (for example Broadcom or Intel) and select Update Driver Software.
3.In the Update Driver Software Windows, select “Browse my computer for driver software.“
4.Now select “Let me pick from a list of device drivers on my computer.“
5.Try to update drivers from the listed versions.
6.If the above didn’t work then go to manufacturers website to update drivers: https://downloadcenter.intel.com/
7.Install the latest driver from the manufacturer’s website and reboot your PC.
By reinstalling the network adapter, you can Fix Windows 10 Freezes Randomly Issue.
Method 18: Repair install Windows 10
This method is the last resort because if nothing works out then this method will surely repair all problems with your PC and will Fix Windows 10 Freezes Randomly Issue. Repair Install just uses an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily.
Recommended for you:
That’s it you have successfully [SOLVED] Windows 10 Freezes Randomly but if you still have any questions regarding this post then feel free to ask them in the comment’s section.