由于一些错误,在您喜欢的浏览器中访问一些网页可能看起来很困难。如果您使用的是Microsoft Edge 浏览器(Microsoft Edge browser),则在浏览任何网页时可能会遇到Microsoft Edge ERR NETWORK CHANGED错误。(ERR NETWORK CHANGED)尽管如此,本指南将 通过有效的故障排除步骤帮助您修复检测到网络更改的(network change)Windows 10错误。(Windows 10)本文中的方法也适用于您的Android 设备(Android device)和其他浏览器。你还在等什么?继续(Continue)阅读文章。
如何在 Windows 10 中修复 Microsoft Edge ERR 网络更改(How to Fix Microsoft Edge ERR NETWORK CHANGED in Windows 10)
除了Windows 10 PC 中的网络冲突外,还有其他一些原因导致检测到网络更改(network change)Windows 10错误。它们在下面列出。
- 更改 IP 地址。
- 路由器冲突。
- 浏览器缓存损坏。
- 来自第三方扩展的冲突。
- 过时的操作系统。
- 不兼容的浏览器设置。
- 恶意软件/病毒攻击。
- VPN/proxy服务器的干扰。
- 过时的浏览器。
- 不兼容的网络适配器。
- WLAN 配置文件中的数据损坏。
- 来自VPN、ISP、网站所有者和代理服务器的限制。
尽管导致连接中断的原因有很多,但在Microsoft Edge中检测到(Microsoft Edge)网络更改(network change)错误,您可以按照以下讨论的方法轻松解决所有问题。
在本文中,我们编制了一份方法列表,可帮助您修复Edge中的此错误。以相同的顺序遵循以下提到的方法以获得完美的结果。
基本故障排除方法(Basic Troubleshooting Methods)
在尝试任何高级故障排除方法之前,请尝试以下基本故障排除方法。基本且简单的故障排除方法可能有助于快速解决问题。
-
(Reload)通过同时按F5 键(F5 key)或Fn + F5 keys重新加载页面。
-
(Restart the browser)通过关闭所有浏览器窗口并打开它们来重新启动浏览器。
-
重新启动(Restart your) 系统(system),因为简单的重新启动可能有助于解决问题。
- 尝试使用不同的 Internet 浏览器(different Internet browsers),例如Google Chrome、Opera和Firefox。
方法 1:运行网络疑难解答(Method 1: Run Network Troubleshooter)
要分析和修复所有连接问题,内置的网络故障排除(network troubleshooter)程序将为您提供帮助。所有的网络问题都将得到修复,网络操作将通过运行网络疑难解答(network troubleshooter)来即兴发挥。以下是在Windows 10 PC上运行网络疑难解答的一些说明。(network troubleshooter)
1. 按Windows 键(Windows key)。在搜索栏中键入疑难解答设置并将其打开。(Troubleshoot settings )
2. 现在,单击附加疑难解答,如下图所示。(click on Additional troubleshooters as depicted below.)
3. 现在,选择“查找”(Find, and fix other problems)下显示的“网络适配器(Network Adapter, )”,并修复其他问题。
4. 选择运行疑难解答,(Run the troubleshooter, )现在将启动网络适配器疑难解答。(Network Adapter troubleshooter)
5. 选择所有网络适配器(All network adapters ),然后单击下一步( Next)。
6. 如果出现问题,请单击应用此修复程序(Apply this fix )并按照后续提示中的说明进行操作。
方法 2:禁用代理(Method 2: Disable Proxy)
使用代理服务器会将 Internet 连接转移到不同的隧道。这将触发ERR NETWORK CHANGED Windows 10 错误消息(error message)。有很多错误消息(error message)要禁用您计算机上的代理服务器。然而,下面解释最简单的方法。
注意:(Note:)退出Microsoft Edge并确保从任务管理器中关闭所有与(Task Manager)Edge相关的应用程序。
1. 现在,点击Windows按钮。键入Proxy并打开,如下所示。
2. 在这里,关闭(OFF)以下设置。
- 自动检测设置(Automatically detect settings)
- 使用设置脚本(Use setup script)
- 使用代理服务器(Use a proxy server)
3. 现在,重新启动Edge 浏览器(Edge browser)并尝试是否可以访问网页。
4. 如果没有,请使用VPN 客户端(VPN client)并检查您的问题是否已解决。如果没有,请尝试将您的 PC 连接到其他网络,例如Wi-Fi或移动热点(mobile hotspot)。
另请阅读:(Also Read:)如何在 Windows 10 上设置 VPN
方法 3:禁用 VPN(Method 3: Disable VPN)
当您的 PC 与VPN(VPN)断开连接时,您的计算机的原始位置将与浏览器映射,导致检测到网络更改(network change)Windows 10错误。因此(Hence),在这种情况下,建议您按照以下说明禁用您的VPN 客户端(VPN client)。
1. 要使用 运行(Run)对话框,请按Windows + R 键(R keys)。
2.输入ms-settings:network-vpn并点击 OK 按钮。
3. 在设置(Settings)窗口中,断开活动的VPN服务并关闭高级选项下的VPN选项。(VPN options)
方法四:清除 Edge 浏览器历史记录(Method 4: Clear Edge Browser History)
更常见的是,损坏的浏览器缓存(browser cache)会导致几个浏览器错误,而不是ERR NETWORK CHANGED Windows 10。大量 cookie 和缓存会减慢您的互联网体验并影响加载响应。您可以按照以下步骤一次性清除它们。
1. 按Windows键。键入Edge并打开它。
2. 像之前一样,单击您的个人资料图片附近的三点图标。(three-dotted icon )
3. 单击设置(Settings)。
4. 现在,导航到左窗格中的隐私、搜索和服务(Privacy, search, and services )选项,如图所示。
5. 然后,向下滚动右侧屏幕并单击(screen and click)清除浏览数据(Clear browsing data )下的选择要清除的(Choose what to clear )选项,如图所示。
注意:(Note: )您可以通过在搜索栏中输入edge://settings/clearBrowserData 直接导航页面以删除Edge中的浏览历史记录。(Edge)
6. 在下一个窗口中,根据您的偏好选择框,例如浏览历史记录、Cookie 和其他站点数据(Browsing history, Cookies, and other site data)以及缓存的图像和文件(Cached images and files),然后单击立即清除(Clear now ),如下所示。
最后,您的所有浏览数据现在都将被清除。
另请阅读:(Also Read:)如何修复 Firefox(Fix Firefox)不加载(Loading)页面
方法 5:禁用扩展(如果适用)(Method 5: Disable Extensions (If Applicable))
如果您在浏览器中安装了任何第三方扩展,您可能会面临检测到网络更改的(network change)Windows 10错误。您可以尝试关闭所有不必要的选项卡(closing all the unnecessary tabs)并重新启动系统。如果您已关闭所有选项卡但仍然遇到问题,请尝试禁用所有扩展。
1.启动Edge浏览器(Edge browser ),点击右上角的三点图标(three-dotted icon )。
2. 现在,单击下面突出显示的扩展。(Extensions )
3. 现在,您添加的所有扩展都将在屏幕上弹出。如图所示,单击管理(Click)扩展。(Manage extensions)
4. 现在,关闭扩展程序并检查您是否再次遇到错误。
5.如果您发现删除任何特定扩展后没有弹出错误,请从浏览器中完全卸载它。然后,选择删除(Remove)。
6. 现在,点击删除(Remove )确认提示,如图所示。
注意:(Note: )如果您再次面对,请在您的网页上同时按F12或按住Ctrl + Shift + I 键。这将在右侧打开开发人员工具。(developer tools )现在,重新加载页面。
方法 6:更新 Microsoft Edge(Method 6: Update Microsoft Edge)
过时的浏览器总是一个问题。发布更新以修复错误和错误,如果您未能更新它们,您可能会遇到几个错误。按照以下说明更新Microsoft Edge 浏览器(Microsoft Edge browser)。
1. 和之前一样,启动Edge浏览器并单击三点图标(three-dotted icon)。
2. 现在,单击突出显示的帮助和反馈(Help and feedback )选项。
3. 然后,单击关于 Microsoft Edge(About Microsoft Edge ),如图所示。
注意:(Note: )您也可以直接键入edge://settings/help 启动关于 Microsoft Edge 页面(About Microsoft Edge page)。
4A。如果有新的更新可用,浏览器会自动将浏览器更新到最新版本。单击(Click) 重新启动(Restart)以更新并重新启动浏览器。
4B。如果浏览器是最新的,它将显示Microsoft Edge 是最新的(Microsoft Edge is up to date)。
5. 最后,在最新版本的浏览器中启动您的网页,并检查Microsoft Edge ERR NETWORK CHANGED Windows 10问题是否再次出现。
另请阅读:(Also Read:)修复 Google Chrome 未更新
方法 7:更新或重新安装驱动程序(Method 7: Update or Reinstall Drivers)
如果您的 PC 上有不兼容或过时的USB(USB)驱动程序,您将无法正确访问您的网页。按照说明更新驱动程序并检查是否 检测到网络更改(network change)Windows 10问题已解决。如果没有,您可以尝试重新安装它们。
选项 I:更新网络驱动程序(Option I: Update Network Drivers)
安装最新版本的驱动程序有助于您的计算机修复驱动程序冲突,从而提高 PC 的稳定性。按照下面提到的步骤,您可以解决与ERR NETWORK CHANGED 错误(ERR NETWORK CHANGED error)有关的所有网络相关问题。
1. 点击Windows 键(Windows key )并输入设备管理器(Device Manager),点击打开(Open)。
2.您将 在主面板上看到网络适配器;(Network adapters)双击它以展开它。
3. 现在,右键单击网络驱动程序( network driver)(例如Intel(R) Dual Band Wireless-AC 3168)并单击更新驱动程序(Update driver)。
4. 现在,单击自动搜索驱动程序(Search automatically for drivers)选项以自动查找和安装驱动程序。
5A。现在,如果驱动程序没有更新,它们将更新到最新版本。
5B。如果它们已经处于更新阶段,屏幕将显示以下消息,已安装适用于您设备的最佳驱动程序(The best drivers for your device are already installed)。
6. 单击关闭(Close)退出窗口。
选项二:重新安装驱动程序(Option II: Reinstall Drivers)
如果您没有通过更新驱动程序来解决网络更改(network change)检测到Windows 10错误,那么您可以尝试按照以下说明重新安装它们。
1.使用上述步骤启动设备管理器。(Device Manager )
2.通过双击展开网络适配器。(Network adapters )
3. 现在,右键单击驱动程序(driver )并选择卸载设备(Uninstall device)。
4. 现在,屏幕上将显示警告提示。(warning prompt)选中删除此设备的驱动程序软件(Delete the driver software for this device)复选框,然后单击卸载(Uninstall)确认提示。
5. 访问制造商的网站(例如Intel)手动下载驱动程序。
6. 下载后,双击下载的文件(downloaded file)并按照给定的说明进行安装。
方法 8:更新 Windows(Method 8: Update Windows)
不仅您的浏览器需要定期更新,您的操作系统也需要定期更新。您可以通过定期更新来修复 Windows 10 计算机中的错误和更新问题。请按照以下步骤更新您的Windows PC。
1. 同时按 Windows + I keys 启动 设置(Settings)。
2. 单击 更新和安全(Update & Security) 磁贴,如图所示。
3. 在 Windows 更新 (Windows Update )选项卡中,单击 检查更新(Check for updates) 按钮。
4A。如果有新的更新可用,请单击 立即安装(Install now) 并按照屏幕上的说明进行操作。完成后重新启动您的电脑。
4B。否则,它将显示 您是最新(You’re up to date) 消息,如图所示。
另请阅读:(Also Read: )修复 Chrome 配置文件错误的 14 种方法
方法 9:运行防病毒扫描(Method 9: Run Antivirus Scan)
如果您的连接被中断,网络更改(network change)被检测到错误,则您的 PC 可能感染了恶意软件。按照下面提到的步骤运行完整的系统扫描,提供令人难以置信的保护来解决您的所有问题。
1. 同时按住Windows + I keys 打开设置(Settings)。
2. 在这里,点击更新和安全(Update & Security),如图所示。
3. 然后,在左窗格中选择Windows 安全选项。(Windows Security )
4. 接下来,选择保护区域下的(Protection areas)病毒和威胁保护(Virus & threat protection )选项。
5. 点击扫描选项(Scan Options),如图所示。
6. 根据您的喜好选择扫描选项,然后单击(preference and click)立即扫描。(Scan Now.)
7A。如果存在威胁,请查看窗口中列出的所有威胁。在这里,单击当前威胁(Current threats)下的开始操作(Start Actions )。
7B。如果您的系统中没有任何威胁,系统将显示“无需操作(No actions needed )”警报,如下所示。
方法 10:将 URL 列入白名单或暂时禁用杀毒软件(Method 10: Whitelist URL or Disable Antivirus Temporarily)
如果即使您的计算机没有恶意软件并且Windows是最新的,您在(Windows)Edge中也遇到此错误,那么超级安全套件(super-security suite)可能会阻止您访问任何特定于内容的URL。以下是在防病毒程序中将(antivirus program)URL(URLs)列入白名单的一些说明。
注意:(Note: )这里以Avast Free Antivirus为例。请按照您的防病毒程序(Antivirus program)的步骤进行操作。
选项 I:将 URL 列入白名单(Option I: Whitelist the URL)
如果您不希望Avast阻止任何特定网站,您还可以按照以下步骤将URL列入白名单并修复检测到(URL)网络(A network)更改Windows 10错误。
1. 导航到搜索菜单(search menu),输入Avast并单击打开(Open)。
2.现在,点击右上角的菜单(right corner)选项(menu ),如下图。
3. 现在,从下拉列表中单击设置。(Settings )
4. 在General 选项卡中,(General tab, )切换到Exceptions选项卡,然后单击Exceptions字段下的ADD ADVANCED EXCEPTION 。
5. 现在,在新窗口中单击Website/Domain
6. 现在,将 URL 粘贴到Type in url path中。接下来,单击添加例外(ADD EXCEPTION )选项。
注意:(Note: )如果您想从Avast 白名单中删除(Avast whitelist)URL,请将鼠标悬停在主设置窗口中的 URL 上,然后单击(Settings window and click)垃圾桶(URL)图标,(Trash icon)如下图所示。
选项二:暂时禁用防病毒软件(Option II: Disable Antivirus Temporarily)
如果您没有通过在防病毒程序中向(antivirus program)URL添加例外来修复它,您可以按照以下说明执行步骤来禁用它们。
1. 导航到任务栏中的防病毒图标(Antivirus icon)并右键单击(right-click )它。
2. 现在,选择Avast shields 控制(Avast shields control )选项。
3. 根据您的方便选择选项并确认屏幕上显示的提示。
- 禁用 10 分钟(Disable for 10 minutes)
- 禁用 1 小时(Disable for 1 hour)
- 禁用直到计算机重新启动(Disable until computer is restarted)
- 永久禁用(Disable permanently)
注意:(Note:)现在,返回主窗口。在这里,您已关闭Avast的所有屏蔽。要激活设置,请单击TURN ON。
另请阅读:(Also Read:) 修复 Chrome 阻止下载问题
方法 11:重置浏览器设置(Method 11: Reset Browser Settings)
如果您对上述修复不满意,请尝试将浏览器重置为默认设置。首先(First),按照以下步骤重置Microsoft Edge,然后检查是否检测到网络更改(network change)Windows 10问题已解决。
1. 启动Edge 浏览器(Edge browser )并导航到设置(Settings)。
2. 现在,在左窗格中,单击重置设置(Reset settings ),如图所示。
注意:(Note: )您也可以键入edge://settings/reset直接启动“重置边缘”页面(Reset Edge page)。
3. 现在,单击将设置恢复为默认值(Restore settings to their default values )选项,如图所示。
4. 现在,单击“重置(Reset )”确认提示,如图所示。
另请阅读:(Also Read:) 如何在Chrome中通过HTTPS启用(HTTPS)DNS
方法 12:修复 Microsoft Edge(Method 12: Repair Microsoft Edge)
如果上述方法都没有帮助您修复 网络更改(network change)检测到Windows 10错误,请尝试修复Microsoft Edge。这样做将修复所有与搜索引擎(search engine)相关的问题、更新或触发此ERR NETWORK CHANGED Windows 10错误的其他相关问题。
注意:如果(Note: )Microsoft Edge 浏览器(Close Microsoft Edge browser)已打开,请关闭它。
1. 按Windows 键(key),键入控制面板(Control Panel)并单击打开(Open)。
2. 将查看方式(View by)设置为类别(Category),然后单击卸载程序(Uninstall a program)。
3. 搜索并单击Microsoft Edge,然后选择更改(Change )选项,如下图所示。
4.在提示中单击是。(Yes)
5. 现在,点击修复(Repair)确认提示。
6.完成上述所有步骤后,重新启动计算机。(Restart )
7. 现在,新版本的Microsoft Edge将安装在您的 PC 上。启动一个站点并检查您的连接是否中断错误现在已修复。
另请阅读:(Also Read:) 修复 Microsoft Edge在(Fix Microsoft Edge)Windows 10中不起作用
方法 13:执行干净启动(Method 13: Perform Clean Boot)
如果所有这些方法都无法为您修复 检测到网络更改的(network change)Windows 10错误,那么您可以尝试重置您的 PC 或将其恢复到以前的版本。这可以帮助您解决任何软件不兼容(software incompatibility)问题,从而修复您的连接被中断、网络更改(network change)检测到Edge 浏览器(Edge browser)错误。以下是干净启动Windows 10 PC 以修复Microsoft Edge ERR NETWORK CHANGED Windows 10问题的几个步骤。
注意:(Note:) 确保(Make sure)您以管理员身份登录以干净启动您的 PC。
1. 要启动运行对话框(Run dialog box),请同时按下Windows + R keys。
2.输入 msconfig(msconfig)并点击OK按钮打开System Configuration。
3. 现在,切换到系统配置(System Configuration )窗口中的服务(Services)选项卡。
4. 选中Hide all Microsoft services(Hide all Microsoft services)旁边的框,然后单击Disable all按钮,如图突出显示。
5. 现在,切换到启动选项卡(Startup tab)并单击打开任务管理器(Open Task Manager)的链接,如下图所示。
6.接下来,右键单击不需要的启动任务,然后单击禁用(Disable)选项,如图所示。
7. 关闭任务管理器(Task Manager)和系统配置(System Configuration)窗口。
8. 最后,重启你的电脑(restart your PC)。
推荐的:(Recommended:)
- 如何关注 Snapchat
- 修复 Firefox 连接重置错误
- 修复您的连接在(Fix)Windows 10中被中断
- (Fix Error STATUS BREAKPOINT)修复Microsoft Edge(Microsoft Edge)中的错误状态断点
我们希望本指南对您有所帮助,您可以修复设备中的ERR NETWORK CHANGED错误。让我们知道哪种方法最适合您。另外,如果您对本文有任何疑问或建议,请随时将它们放在评论部分。
Fix Microsoft Edge ERR NETWORK CHANGED in Windows 10
Accessing a fеw web pages in your favorite browser might seem difficult due to some errors. If you are using the Microsoft Εdge browser, you might have faced Microsoft Edge ERR NETWORK CHANGED error while surfing through any web pages. Nevertheless, this guide will help you fix a network change was detected Windows 10 error with effective troubleshooting steps. The methods in this article also apply to your Android device and other browsers too. So, what are you waiting for? Continue reading the article.
How to Fix Microsoft Edge ERR NETWORK CHANGED in Windows 10
Apart from network conflicts in your Windows 10 PC, a few other reasons cause a network change was detected Windows 10 error. They are listed below.
- Change in IP address.
- Router conflicts.
- Corrupt cache in browser.
- Conflicts from third-party extensions.
- Outdated Operating System.
- Incompatible browser settings.
- Malware/virus attack.
- Interference from VPN/proxy servers.
- Outdated browser.
- Incompatible Network Adapters.
- Corrupt data in WLAN profiles.
- Restrictions from VPN, ISP, website owners, and proxy servers.
Although there is a huge list of reasons that cause your connection was interrupted a network change was detected an error in Microsoft Edge, you can easily resolve them all by following the below-discussed methods.
We have compiled a list of methods that will help you fix this error in the Edge in this article. Follow the below-mentioned methods in the same order to attain perfect results.
Basic Troubleshooting Methods
Before trying any advanced troubleshooting methods, try the following basic troubleshooting methods. A basic and easy troubleshooting method may help in resolving the issue quickly.
-
Reload the page by pressing the F5 key or Fn + F5 keys together.
-
Restart the browser by closing all the browser windows and opening them.
-
Restart your system because a simple restarting might help in fixing the issue.
- Try using different Internet browsers such as Google Chrome, Opera, and Firefox.
Method 1: Run Network Troubleshooter
To analyze and fix all the connection problems, the in-built network troubleshooter will help you. All the network problems will be fixed, and the network operations will be improvised by running a network troubleshooter. Here are a few instructions to run the network troubleshooter on Windows 10 PC.
1. Hit the Windows key. Type Troubleshoot settings in the search bar and open it.
2. Now, click on Additional troubleshooters as depicted below.
3. Now, select Network Adapter, which is displayed under Find, and fix other problems.
4. Select Run the troubleshooter, and the Network Adapter troubleshooter will be launched now.
5. Select All network adapters and click Next.
6. If there is an issue, click on Apply this fix and follow the instructions given in the successive prompts.
Method 2: Disable Proxy
Using proxy servers will divert the internet connection to a different tunnel. This will trigger ERR NETWORK CHANGED Windows 10 error message. There are so many error messages to disable proxy servers on your computer. Yet, the simplest method is explained below.
Note: Exit from Microsoft Edge and make sure you close all the applications related to Edge from Task Manager.
1. Now, hit the Windows button. Type Proxy and open as highlighted below.
2. Here, toggle OFF the following settings.
- Automatically detect settings
- Use setup script
- Use a proxy server
3. Now, relaunch the Edge browser and try if you can visit web pages.
4. If not, use a VPN client and check if your problem is fixed. If not, try connecting your PC to another network like Wi-Fi or a mobile hotspot.
Also Read: How to set up a VPN on Windows 10
Method 3: Disable VPN
When your PC is disconnected from VPN, the original location of your computer will be mapped with the browser, leading to a network change was detected Windows 10 error. Hence, in this case, you are advised to disable your VPN client as instructed below.
1. To use the Run dialog box, press the Windows +R keys.
2. Type ms-settings:network-vpn and click the OK button.
3. In the Settings window, disconnect the active VPN service and toggle off the VPN options under Advanced Options.
Method 4: Clear Edge Browser History
More often, corrupt browser cache leads to several browser errors rather than ERR NETWORK CHANGED Windows 10. A bulk of cookies and cache will slow down your internet experience and affects the loading responses. You can clear them all in a single shot by following the below-mentioned steps.
1. Press the Windows key. Type Edge and open it.
2. Click on the three-dotted icon near your profile image as you did earlier.
3. Click Settings.
4. Now, navigate to the Privacy, search, and services option in the left pane as shown.
5. Then, scroll down the right screen and click on Choose what to clear option under Clear browsing data as shown.
Note: You can directly navigate the page to delete browsing history in the Edge by typing edge://settings/clearBrowserData in the search bar.
6. In the next window, select the boxes according to your preferences like Browsing history, Cookies, and other site data, and Cached images and files, and click on Clear now as highlighted below.
Finally, all your browsing data will be cleared now.
Also Read: How to Fix Firefox Not Loading Pages
Method 5: Disable Extensions (If Applicable)
If you have installed any third-party extensions in your browser, you may face a network change was detected Windows 10 error. You can try closing all the unnecessary tabs and restarting your system. If you have closed all the tabs and still face the issue, try to disable all the extensions.
1. Launch Edge browser and click on the three-dotted icon at the top right corner.
2. Now, click on Extensions as highlighted below.
3. Now, all of your added extensions will pop up on the screen. Click on Manage extensions as shown.
4. Now, toggle off the extension and check if you face the error again.
5. If you find the error does not pop up after removing any particular extension, then uninstall it completely from your browser. Then, select Remove.
6. Now, confirm the prompt by clicking on Remove as shown.
Note: If you face the again, hit F12 or press and hold Ctrl + Shift + I keys together on your webpage. This will open developer tools on the right side. Now, reload the page.
Method 6: Update Microsoft Edge
Outdated browser is always a problem. Updates are released to fix the bugs and errors, and if you fail to update them, you may face several errors. Follow the below instructions to update the Microsoft Edge browser.
1. As you did earlier, launch the Edge browser and click on the three-dotted icon.
2. Now, click on the Help and feedback option as highlighted.
3. Then, click on About Microsoft Edge as shown.
Note: You can also type edge://settings/help launch the About Microsoft Edge page directly.
4A. If a new update is available, the browser will automatically update the browser to the latest version. Click Restart to update and restart the browser.
4B. If the browser is up-to-date, it will show that Microsoft Edge is up to date.
5. Finally, launch your webpage in the latest version of your browser and check if Microsoft Edge ERR NETWORK CHANGED Windows 10 issue recurs.
Also Read: Fix Google Chrome Not Updating
Method 7: Update or Reinstall Drivers
You cannot access your web pages properly if you have incompatible or outdated USB drivers on your PC. Follow the instructions to update your drivers and check if a network change was detected Windows 10 problem is resolved. If not, you can try reinstalling them.
Option I: Update Network Drivers
Installing the latest version of drivers helps your computer to fix the driver conflicts, thereby improving the stability of the PC. By following the below-mentioned steps, you can solve all network-related issues concerning ERR NETWORK CHANGED error.
1. Hit the Windows key and type Device Manager, click on Open.
2. You will see the Network adapters on the main panel; double-click on it to expand it.
3. Now, right-click on the network driver (e.g. Intel(R) Dual Band Wireless-AC 3168) and click Update driver.
4. Now, click on Search automatically for drivers options to locate and install a driver automatically.
5A. Now, the drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, The best drivers for your device are already installed.
6. Click on Close to exit the window.
Option II: Reinstall Drivers
If you did not attain any fix to a network change was detected Windows 10 error by updating the drivers, then you can try reinstalling them as instructed below.
1. Launch the Device Manager using the steps mentioned above.
2. Expand Network adapters by double-clicking on them.
3. Now, right-click on the driver and select Uninstall device.
4. Now, a warning prompt will be displayed on the screen. Check the box Delete the driver software for this device and confirm the prompt by clicking Uninstall.
5. Visit the manufacturer’s website (e.g. Intel) to download the driver manually.
6. Once downloaded, double-click on the downloaded file and follow the given instructions to install it.
Method 8: Update Windows
Regular updates are not only necessary for your browsers but also for your operating systems too. You can fix the bugs and update problems in your Windows 10 computer by updating it periodically. Follow the below-mentioned steps to update your Windows PC.
1. Press Windows + I keys simultaneously to launch Settings.
2. Click on the Update & Security tile, as shown.
3. In the Windows Update tab, click on Check for updates button.
4A. If a new update is available, then click Install now and follow the on-screen instructions. Restart your PC when done.
4B. Otherwise, it will show You’re up to date message as shown.
Also Read: 14 Ways to Fix Chrome Profile Error
Method 9: Run Antivirus Scan
If you are getting your connection was interrupted a network change was detected an error, there may be some chances that your PC has a malware infection. Follow the below-mentioned steps to run a full system scan that offers incredible protection to fix all of your problems.
1. Press and hold Windows + I keys together to open Settings.
2. Here, click on Update & Security, as shown.
3. Then, select the Windows Security option in the left pane.
4. Next, select the Virus & threat protection option under Protection areas.
5. Click on Scan Options, as shown.
6. Choose a scan option as per your preference and click on Scan Now.
7A. If there are threats, have a glance at all the threats listed in the window. Here, click on Start Actions under Current threats.
7B. If you do not have any threats in your system, the system will show the No actions needed alert as highlighted below.
Method 10: Whitelist URL or Disable Antivirus Temporarily
If you face this error in Edge even after your computer is malware-free and Windows is up to date, then there are some chances that the super-security suite might prevent you from accessing any content-specific URL. Here are some instructions to whitelist URLs in the antivirus program.
Note: Here, Avast Free Antivirus is taken as an example. Do follow the steps according to your Antivirus program.
Option I: Whitelist the URL
If you do not want Avast to block any particular website, you can also whitelist the URL by following the below-mentioned steps and fix A network change was detected Windows 10 error.
1. Navigate to the search menu, type Avast and click on Open.
2. Now, click on the menu option at the top right corner, as shown below.
3. Now, click on Settings from the drop-down list.
4. In the General tab, switch to the Exceptions tab and click on ADD ADVANCED EXCEPTION under the Exceptions field.
5. Now, click on Website/Domain in the new window.
6. Now, paste the URL in the Type in url path. Next, click on ADD EXCEPTION option.
Note: If you want to remove the URL from the Avast whitelist, hover over your URL in the main Settings window and click on the Trash icon as depicted below.
Option II: Disable Antivirus Temporarily
If you did not fix it by adding an exception to the URL in your antivirus program, you could disable them by implementing the steps as instructed below.
1. Navigate to the Antivirus icon in the Taskbar and right-click on it.
2. Now, select the Avast shields control option.
3. Choose the option according to your convenience and confirm the prompt displayed on the screen.
- Disable for 10 minutes
- Disable for 1 hour
- Disable until computer is restarted
- Disable permanently
Note: Now, go back to the main window. Here, you have turned off all shields from Avast. To activate the settings, click on TURN ON.
Also Read: Fix Chrome Blocking Download Issue
Method 11: Reset Browser Settings
If you are not satisfied with the above fixes, then try resetting your browser to its default settings. First, follow the below-mentioned steps to reset Microsoft Edge, then check if a network change was detected Windows 10 problem is resolved.
1. Launch Edge browser and navigate to Settings.
2. Now, in the left pane, click on Reset settings as shown.
Note: You can also type edge://settings/reset to launch the Reset Edge page directly.
3. Now, click on Restore settings to their default values option as shown.
4. Now, confirm the prompt by clicking on Reset as shown.
Also Read: How to Enable DNS over HTTPS in Chrome
Method 12: Repair Microsoft Edge
If none of those mentioned above methods has helped you fix a network change was detected Windows 10 error, try repairing Microsoft Edge. Doing this will fix all the relevant issues with the search engine, updates, or other related problems triggering this ERR NETWORK CHANGED Windows 10 error.
Note: Close Microsoft Edge browser if it is opened.
1. Press the Windows key, type Control Panel and click on Open.
2. Set the View by as Category and click Uninstall a program.
3. Search and click on Microsoft Edge and select the Change option as depicted in the below picture.
4. Click Yes in the prompt.
5. Now, confirm the prompt by clicking on Repair.
6. Restart the computer once you complete all the steps mentioned above.
7. Now, the new version of Microsoft Edge will be installed on your PC. Launch a site and check if Your connection was interrupted error is fixed now.
Also Read: Fix Microsoft Edge Not Working in Windows 10
Method 13: Perform Clean Boot
If all of these methods fail to give you a fix to a network change was detected Windows 10 error, then you can try resetting your PC or restoring it to the previous version. This helps you resolve any software incompatibility issues, thereby fixing your connection was interrupted a network change was detected an error in the Edge browser. Here are a few steps to clean boot your Windows 10 PC to fix Microsoft Edge ERR NETWORK CHANGED Windows 10 issue.
Note: Make sure you log in as an administrator to clean boot your PC.
1. To launch the Run dialog box, press the Windows + R keys together.
2. Type msconfig and click the OK button to open System Configuration.
3. Now, switch to the Services tab in the System Configuration window.
4. Check the box next to Hide all Microsoft services, and click on Disable all button as shown highlighted.
5. Now, switch to the Startup tab and click the link to Open Task Manager as depicted below.
6. Next, right-click on the startup tasks which are not required and click on Disable option as shown.
7. Close the Task Manager and System Configuration windows.
8. Finally, restart your PC.
Recommended:
We hope that this guide was helpful and you could fix ERR NETWORK CHANGED error in your device. Let us know which method worked for you the best. Also, if you have any queries or suggestions regarding this article, then feel free to drop them in the comments section.